Bedienungsanleitung Taurus TALLIN 600 (Seite 15 von 98) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

730807

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

- When the room temperature is higher than

the selected temperature, the heater will stop

heating.

PROGRAM SELECTION:

- Press (3) to select the program desired.

- Press (4) or (5) to select running mode and

press (3) to conrm.

- Free

- Daily

- Weekly

PROGRAM SETTING:

FREE PROGRAM:

- Chose the desired temperature using the but-

tons (4) and (5) and wait until the indicator stops

ashing.

Press (3) continuously until the shows on

screen.

- Press (4) or (5) to select the timer length in 30

minutes incremets. Maximum 24 hours.

- - The time programmed or remaining time will

appear on the display.

Press continuously (3) to exit timer mode,

until the disappeared.

DAILY PROGRAM:

- Chose the desired temperature using the but-

tons (4) and (5) and wait until the indicator stops

ashing.

- Select the appliance mode desired.

- Confort

and

- Economic and

- Defrost , program content displayed empty.

- Select temperature for each working mode:

- Press continuously (3) until

shows on screen.

- Pres (4) or (5) to sed your comfort temperature

desired.

- Pres (3) to conrm and the

shows on screen.

- Pres (4) or (5) to sed your economic temperatu-

re desired.

- Select the desired program (2).

- Press continuously (3) to enter program setting

until

shows on screen.

- Time segment to be programmed ashes.

- Press (3) to select the mode desired

, or

- Press (4) or (5) to move to the next or previous

time segment.

- Repeat the operation until set the 24 hours with

the desired mode.

WEEKLY PROGRAM:

- Select weekly program

- Press continuously (2) until (II) and (III) ashes.

- Select the desired program with (4) or

(5) for the day that ashes.

- Once selected the program press the button (2)

- Repeat the operation until you complete the

schedule for every day of the week.

- Press (3) to complete the weekly program

settings.

SAFETY LOCK:

- The buttons will be locked after one minute

without press any button.

Will appear on the screen.

- Press (4) and (5) at same time to unlock

ONCE YOU HAVE FINISHED USING THE

APPLIANCE:

- Turn the appliance off using the on/off button.

- Turn the appliance off, using the on/off switch.

- Unplug the appliance from the mains.

- Clean the appliance.

SAFETY THERMAL PROTECTOR:

- The appliance has a safety device, which pro-

tects the appliance from overheating.

- When the appliance switches itself on and off

repeatedly, for reasons other than the ther-

mostat control, check to ensure that there are

no obstacles that impede correct air entry or

expulsion.

- If the appliance turns itself off and does not

switch itself on again, disconnect it from the

mains supply, and wait for approximately 15

minutes before reconnecting. If the machine

does not start again seek authorised technical

assistance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Taurus TALLIN 600 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info