set to the temperature required
Oscillation function:
- The oscillation function makes it
possible to direct the flow from the
apparatus so that it automatically
alternates over a range of 75º
- To activate this function, press the
(C) switch.
- To deactivate this function, follow
the procedure for switching it on in
reverse.
Once you have finished using the
appliance:
- Select the minimum position (MIN)
using the thermostat control.
Carry handle/s:
- This appliance has a handle on the
back to make it easy and convenient
to transport.
Safety thermal protector:
- The appliance has a safety device,
which protects the appliance from
overheating.
- If the appliance turns itself off
and does not switch itself on again,
disconnect it from the mains supply,
and wait for approximately 15
minutes before reconnecting. If the
machine does not start again seek
authorised technical assistance.
Cleaning
- Disconnect the appliance from the
mains and allow it to cool before
undertaking any cleaning task.
- Clean the electrical equipment and
the mains connection with a damp
cloth and dry. DO NOT IMMERSE IN
WATER OR ANY OTHER LIQUID.
- Clean the equipment with a damp
cloth with a few drops of washing-up
liquid and then dry.
- Do not use solvents, or products
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
- Do not let water or any other liquid
get into the air vents to avoid damage
to the inner parts of the appliance.
- Never submerge the appliance in
water or any other liquid or place it
under running water.
- Remark: When the appliance is
used as a heater after long periods
in storage or after having been used
solely as a fan a small amount of
smoke may be produced. This is not
important and is due to the heater
burning dust deposits which have
accumulated on the heating element.
This phenomenon may be avoided by
cleaning the inside of the appliance
beforehand through the grill with a
vacuum cleaner or pressurised air.
Anomalies and repair
- Take the appliance to an authorised
technical support service if a product
damage or other problems arise. Do
not try to dismantle or repair without
assistance, as this may be dangerous.
- If the connection to the mains has
been damaged, it must be replaced
and you should proceed as you would
in the case of damage.
