Bedienungsanleitung Taurus ULTIMATE GO (Seite 9 von 48) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

730929

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

- At the end of the time period specied above,

remove the battery from the charger.

- When the battery is charged disconnect the

charger from the mains supply.

- NB: Do not use the appliance while it is con-

nected to the charger.

HOW TO CHECK THE BATTERY’S CHARGE

LEVEL:

- Press the ON/OFF button in order to see the

battery indicator lights.

- If no pilot light lights up, this means that the

battery is completely at.

- NB: For a long battery life, it is advisable to

charge the battery, only, when it has run out

completely.

INSTRUCTIONS FOR USE

BEFORE USE:

- Make sure that product’s packaging has been

removed.

- Before using this product for the rst time, it is

important to make a full charge of batteries.

- Prepare the appliance according to the function

you wish to use:

VACUUMING FUNCTION:

USE:

- Turn the appliance on, by using the on/off

button.

- Select the desired speed.

FITTING AN ACCESSORY TO THE HAND

VACUUM:

- The hand vacuum is designed in such a way

that it allows the following accessories to be

tted: (use the combination that best meets

your requirements). (Fig.1).

- Furniture brush: Equipped with a brush at the

end, which brushes the surface as it is used.–

Crevice nozzle: Specially designed for getting

into cracks and difcult corners.

ONCE YOU HAVE FINISHED USING THE

APPLIANCE:

- Turn the appliance off using the on/off button.

- Clean the appliance.

CLEANING

- Disconnect the battery charger from the mains

and allow it to cool before undertaking any

cleaning task.

- Clean the equipment with a damp cloth with

a few drops of washing-up liquid and then

dry.

- Do not use solvents, or products with an acid or

base pH such as bleach, or abrasive products,

for cleaning the appliance.

- Never submerge the appliance in water or any

other liquid or place it under running water.

EMPTYING THE DUST BOX

- Empty the dust box when it is full (observation

facilitated by transparent windows), or when

vacuuming power is notably reduced.

- Disconnect the accessories from the vacuum

cleaners air intake. (Fig.2).

- Open the lid of the dust box and empty the

contents into the appropriate waste disposal

receptacle.

- Close the lid of the dust box.

CHANGING THE FILTERS:

- Motor lter, it is advisable to be changed at

least once a year or every 100 hours of the

appliance’s use.

TO REMOVE THE FILTERS:

- Remove the dust tank pulling out without press-

ing any button. (Fig.3)

- Remove the lter from its housing (Fig.4).

- To reassemble the lter, proceed with the

above instructions, in reverse order.

- Engage the dust tank in the vacuum cleaner.

(Fig.5)

CLEANING THE ROTARY BRUSH:

- To remove the brush:

- Turn the rotating button on the bottom of the

tting to the left in order to release the brush.

(Fig.6).

- Remove the brush and clean.

- To reassemble, follow the above instructions

but in reverse.

SUPPLIES

- Supplies can be acquired from distributors

and authorised establishments (such as lters,

etc...) for your appliance model.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Taurus ULTIMATE GO Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info