FAQ & Troubleshooting:
1. I'm not getting any sound from Create XT
a. Confirm the PA is on and the mixer channel is
turned up.
b. Check each cable by connecting your mic directly to
the sound system and testing.
c. Check that the 48V light is lit if you are using a
phantom powered condenser mic.
2. I'm only hearing my dry voice
a. Confirm that the On footswitch light is on.
b. Set Mix knob to center detent position.
c. Check that Create XT’s Left/Main output is
connected to your PA if running in mono.
d. Check that at least one effect on/off is active.
3. My sound is distorted.
a. Check if the current patch is a Transducer patch that
has distortion enabled.
b. If the input light is turning red frequently, reduce
input level.
4.I’m getting feedback
a. Move the PA speaker or monitor so it is in a line
with your mic and facing you.
b. Reduce volume of the PA
c. Use Tone setting alternate #1 with less high boost
or turn Tone off altogether.
5.I can’t turn effects off or on
a. Press and hold the On footswitch to exit Tap Tempo
mode.
6.Some blocks aren’t working
a. There are presets that require multiple blocks
engaged in order to complete the effects path.Turn
on additional blocks to get sound.
FAQ and Troubleshooting
28
