35
FAQ & Troubleshooting:
1. I'm not getting any sound out of Create
a. Confirm the power adapter is properly connected
by checking that a patch number is lit on the Numeric
Display.
b. Confirm your microphone is connected properly by
talking through microphone and looking for the Input
Light to light green or orange. If the Input Light is going
on, check your connections and settings on your sound
system. If the Input Light is not on, press the Right
Footswitch and turn the effect off, then try varying the
Input Knob and see if you can start to hear the
dry/unaffected signal through your sound system.
Additionally, if you have a condenser microphone,
ensure phantom power is enabled.
2. I'm not hearing any effect from Create, just
my dry voice
a. If you're running in stereo output mode, ensure the
Effect On Light is on. If it's off, press the Effect On button
once to engage it. Additionally, ensure the Mix Knob is
not in the off position (fully left).
b. If you're running in mono output mode, confirm
which outputs are connected to your sound system.
Only the Left Output will produce effects. If it's not
producing any effect sound, ensure the Effect On Light is
on. If it's off, press the Effect On button once to engage
it. Additionally, ensure the Mix Knob is not in the off
position (fully left). If you are using the Right Output in
regular output mode, realize it's a dry output that
cannot produce effects - use the Left Output.
3. I don't hear any difference when I turn a
Tweak X or Tweak Y Knob.
a. Ensure the Effect On Light is on. If it's off, press the
Effect On button once to engage it. Additionally, ensure
the Mix Knob is not in the off position (fully left).
b. Check the Patch List section and confirm what
controls are assigned to X and Y to get a sense of what
FAQ & Troubleshooting
