Bedienungsanleitung TCL 43P20US (Seite 12 von 24) (Englisch)

794253

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Connections and Setup

Initial Setup

Initial setup involves selecting all the settings required to

be able to search for and store all the channels you can

receive. Make sure that the television is switched on

Initial Setup

menu appears, which guides you through the initial

setup process. Press OK to enter.

Select Language

Press ▲/▼ to select your preferred language for the

menu system, and then press OK to enter the next

step.

Select Location

Press ▲/▼ to select your location: Home or Shop

and then press OK to enter the next step.

Agree to Disclaimer

Press ▲/▼ to select I agree and then press OK to

enter the next step.

Set up Network

Press ▲/▼ to select Setup and press OK to

Network

Settings on page 17. You can also select Skip to

skip this step and perform network settings later.

Timezone

Press ▲/▼ to select Your Time Zone and press

OK to enter the next step.

Scan for Channels

Press ▲/▼ to select Scan and press OK to start

the search automatically. All available TV channels

are stored. This operation takes a few minutes. The

display shows the progress of the search and the

number of programs found. You can also select Skip

to skip this step and perform channel scan later.

Note: To prevent the channel setup process from being

interrupted, wait for the message indicating that the

setup is complete.

During the setup, user can follow the hint available

at the bottom of the screen to return to the last step

by pressing back button or EXIT to interrupt the

search halfway.

Initial Setup Complete

After initial setup is complete, press OK to exit.

The channels are arranged in a preset order. If you

wish to skip channels, or organize channels, press

Setting button to display the main menu, select

Channel > Channel Edit and press OK to enter.

Initial Setup Language

Initial Setup

Plese select your language

Plese select your location

If you skip this step, network setup will be preformed in menu

Please select your Timezone

First, please connect antenna!

If you skip this step, channel scan will be performed in Menu.

Disclaimer

The contents and service(collectively the Licensed Application) made available to you through this

TV set(this Device) are licensed, not sold, to you for use only under these terms and conditions. The

providers of the Licensed Application(each an Application Providers) reserve all rights not expressly

granted to you.

1. Scope of License

The licensed granted to you for a Licensed Application by the relevant Application Provider is limited to

a non-transferable license to use the Licensed Application on the Device that you own or control. You

Location

Network Type

Disclaimer

enozemiT

Channel Scan

English

Españo

Home

Setup

I agree

Westem Australia GMT+8

South Australia GMT+9.5

Northem Territory GMT+9.5

New South Wales GMT+10

Victoria GMT+10

Queensiland GMT+10

Tasmania GMT+10

Scan

Skip

Shop

Back

Select

Browse

Select

Confirm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TCL 43P20US Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info