Bedienungsanleitung TCL 48E4900FS (Seite 22 von 23) (Englisch)

794230

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Other Information

Troubleshooting

Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list.

1. Adjust the position and orientation of the indoor/

outdoor antenna.

2. Check the connection of antenna.

3. Fine tune the channel.

4. Try another channel. Broadcasting failure may

happen.

Ignition

Black spots or horizontal streaks appear, or the picture

utters or drifts. This is usually caused by interference

from car ignition system, neon lamps, electric drills, or

other electrical appliance.

Ghost

Ghosts are caused by the television signal following

two paths. One is the direct path, the other is reected

from tall buildings, hills, or other objects. Changing the

direction or position of the antenna may improve the

reception.

Radio frequency interference

This interference produces moving ripples or diagonal

streaks, and in some case, loss of contrast in the

picture. Find out and remove the radio interference

source.

* To bring you better visual experience, please remove

all labels from TV front panel and screen before use.

* Figures and illustrations in this User Manual are

provided for reference only and may differ from actual

product appearance. Product design and specications

may be changed without notice.

No picture, no sound

1. Check if the fuse or circuit breaker is working.

2. Plug another electrical device into the outlet to make

sure it is working or turned on.

3. Power plug is in a bad contact with the outlet.

4. Check the signal source.

No colour

1. Change the colour system.

2. Adjust the saturation.

3. Try another channel. Black-white programme may

be received.

Remote control does not work

1. Change the batteries.

2. Batteries are not installed correctly.

No picture, normal sound

1. Adjust the brightness and contrast.

2. Broadcasting failure may happen.

Normal picture, no sound

1. Press the VOLUME UP button to increase volume.

2. Volume is set to mute, press the MUTE button to

restore sound.

3. Change the sound system.

4. Broadcasting failure may happen.

Unorderly ripples on the picture

It is usually caused by local interference, such as cars,

daylight lamps and hair driers. Adjust the antenna to

minimize the interference.

Blank screen in VGA mode

Perhaps the TV cannot recognize the resolution set

by the PC. Suggest to change to the best resolution or

other standard resolutions of the Windows system.

Snowy dots and interference

If the antenna is located in the fringe area of a television

signal where the signal is weak, the picture may be

marred by dots. When the signal is extremely weak,

it may be necessary to install a special antenna to

improve the reception.

Base Installation

To fix the double support base on the unit by

screws, the installation is completed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TCL 48E4900FS Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info