Bedienungsanleitung TCL L26E9AD (Seite 14 von 16) (Englisch)

472033

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Chapter 4

Other Information

Troubleshooting

Most problems you encounter with your TV can be corrected by

consulting the following troubleshooting list.

No picture, no sound

1. Check if the fuse or circuit breaker is working.

2. Plug another electrical device into the outlet to make sure it is

working or turned on.

3. Power plug is in a bad contact with the outlet.

4. Check the signal source.

No color

1. Adjust the Color setting.

2. Try another channel. Black-white program may be received.

Remote control does not work

1. Change the batteries.

2. Batteries are not installed correctly.

3. Main power is not connected.

No picture, normal sound

1. Adjust the brightness and contrast.

2. Broadcasting failure may have occurred.

Normal picture, no sound

1. Press the Vol+ button to increase volume.

2. Volume is set to mute, press the mute button to restore sound.

3. Broadcasting failure may have occurred.

Unorderly ripples on the picture

It is usually caused by local interference, such as cars, daylight lamps

and hair driers. Adjust the antenna to minimize the interference.

Blank screen in VGA mode

Perhaps the TV can not recognize the resolution set by the PC.

It is suggested to change to the best resolution or other standard

resolutions of the Windows system.

Snowy dots and interference

If the antenna is located in the fringe area of a television signal where

the signal is weak, the picture may be marred by dots. When the

signal is extremely weak, it may be necessary to install a special

antenna to improve the reception.

1. Adjust the position and orientation of the indoor/outdoor antenna.

2. Check the connection of the antenna.

3. Try another channel. Broadcasting failure may have occurred.

Ignition

Black spots or horizontal streaks appear, or the picture flutters or drifts.

This is usually caused by interference from car ignition systems, neon

lamps, electric drills, or other electrical appliances.

Ghost

Ghosts are caused by the television signal following two paths. One is

the direct path, the other is reflected from tall buildings, hills, or other

objects. Changing the direction or position of the antenna may improve

the reception.

Radio frequency interference

This interference produces moving ripples or diagonal streaks, and in

some case, loss of contrast in the picture. Find out and remove the

radio interference source.

* Design and specifications are subject to change without notice.

Base Installation

Note: If the base has been assembled (for models L32E77D and

L42E77D), just ignore the following instructions.

1. Get the base and the supplied screws out of the package.

Note: Be careful to place the hefty base safely in case of damage.

2. Use a screw-driver to fix the screws.

3. Above g raphics are presentation only.

The state after installing

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TCL L26E9AD Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info