Bedienungsanleitung TCL L28D2700 (Seite 11 von 12) (Englisch)

794217

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Short-cut for PVR

Press Option button on remote control to record the

programme directly.

4. In recording, the tool bar shows to indicate the recording

progress. Press STOP button to stop recording manually.

If the recording duration finishes, it will stop automatically.

during recording, only PLAY and PAUSE in directions on

screen are working.

Advanced Functions

5. For obtaining better audio and video quality, suggests

to use the external device which accords with USB2.0

standard.

6. Connecting two USB hard disk devices

-The parameters of file, such as the pixel of picture,

code rate of audio and video file, sampling rate of

audio file, exceed the limit of the system;

simultaneously

can cause to slow the speed of reading or other

problems, suggests to connect two U disk or one

USB hard disk and one U-disk simultaneously.

7. When playing the video with high compression ratio,

these phenomenons, such as picture standstill and

menu long time response, are normal.

8. For some USB device with power supply, such as

large size hard disk, MP4, etc., Suggests using it

with power to avoid electric power shortage.

2. Hot plug: Do not disconnection when the system is

reading or transmitting data, avoid damaging the

system or the device.

3. Pay attention to the power supply of the device when

you are using a mobile hard disk or a digital camera.

If the power supply is not sufficient or not stable, you

may encounter problems during operating or can not

operate at all. In this case, please restart the device,

or unplug the device and plug it again, and ensure

that its power supply is normal.

4. The system supports standard USB1.1 and USB2.0

devices, such as standard U-disks, MP3 players,

mobile hard disks, etc..

1. Under the following conditions, this system cannot

decode the file and the file cannot be play normally:

-The parameters of file, such as the pixel of picture,

code rate of audio and video file, sampling rate of

audio file, exceed the limit of the system;

-The format of file is not matched or the file is harmed.

Note: The code rate of this system does not support

exceed 20Mbps.

Frequently Asked Questions:

Attention and Frequently Asked Questions

1.Some non-standard mobile storage devices maybe

cannot be recognized. Please change to use the

standard device.

2.This system supports the following file formats:

Picture format: JPEG, BMP, PNG.

Video format: H.264, MPEG4, MPEG2, MPEG1, etc..

Audio Format: MP3.

Note: for coding files, there are many kinds non-standard

coding method, so this system can not be guaranteed to

support the file formats using any coding method.

Attention

Using this function you may know the following

programme.

1. Press UP/DOWN buttons to move the highlight

to Channel or Time item.

2. Press LEFT/RIGHT buttons to select Channel or

Time item.

Select Channel, and the programme information

on both the day and the next day will appear.

Select Time, and the programme information in

one week will appear.

Programme Guide

Reminder Setting

Using this function, you will not forget to watch the

programme you desire.

1. Press BLUE button to enter Reminder Setting menu,

use UP/DOWN/LEFT/RIGHT buttons to select and

adjust it. Then press OK button to save.

2. Near the time that you set, it will remind you the

channel will be switched automatically in 10 seconds.

Allows you to record your favorite programme so that

you will not miss the favorite part even if you go out..

If you go out, you may set the time that programme will

play, then add it in the schedule list, at that time, it will

start to record automatically. But, before that ,need to

set the turnon timer for the TV.

PVR (Personal Video Record)

3. Press OK button to confirm it. The time information will

keep in the Schedule list automatically.

Record the Programme

1. Press GUIDE button to display the digital programme

guide. Then press RED button to enter submenu .

2. Use UP/DOWN buttons to select the item that you

want to adjust, then press LEFT/RIGHT buttons to

adjust it.

Note: select Mode Auto, can not be adjusted the time.

5. To watch the recorded programs, go to USB/ Movie

and find the folder PVR.

Schedule List

Allows you to perform scheduled recoding and reminding.

1. According to the steps above to add into list.

Press UP/DOWN buttons to select items and use LEFT/

RIGHT button s to adjust them. Press OK to save your

selection.

2. Press yellow button to enter the schedule list.

Enter the schedule, press RED button may delete the

list that you select.

3. The TV will record the programme at the set time

automatically. A prompt appears during the last

seconds before recording.

Before you plug the USB device to TV, make sure you

have backed up the date in the device to avoid the

unusual performance make your important data lost.

Do not unplug the USB device when the system is reading

a file or transmitting data, otherwise the system or the

device may be damaged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TCL L28D2700 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info