Bedienungsanleitung TCL LE39FHDF3300 (Seite 12 von 26) (Englisch)

794242

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Connections and Setup

Initial Setup

Initial setup involves selecting all the settings required to be

able to search for and store all the channels you can receive.

Make sure that the television is switched on and follow all the

steps in turn specied hereafter.

The rst time you switch the set on, the Initial Setup Wizard

opens, which guides you through the initial setup

process.

1. The rst step of the setup requires you to select your

preferred language for the menu system. Press ▲/▼ to

select your language, then press OK/► to enter the next

screen.

2. A menu screen asks you to set the TV Location.

• Choosing “Home” for the TV Location assigns the optimal

picture settings for most home environments.

• Choosing “Retail”, which is not Energy Star compliant,

sets the unit up with predened settings for retail displays.

In this setting, the power consumption may exceed the

requirements of the Energy Star® qualication.

Use ▲/▼ to select the desired location setting (Home/

Retail); then press OK/► to continue to the next screen.

Note: if you select

Retail

, a screen menu will display to ask

you go back to the previous menu to select Home again, or

you can conrm to proceed to the next screen.

3. Use ▲/▼ to select the current local time zone. Press OK/►

to continue to the next screen.

4. On the Tuner screen, select either Antenna or Cable/Sat.

Press OK/► to continue to the next screen.

Note: If you are using a satellite or cable set-top box,

you do

not have to complete the Channel Scan.

5. The Channel Scan screen is now displayed. The default

choice is to scan. Press OK/► to begin the channel scan for

available channels to be stored in the TV’s memory.

Note: If you do not want to scan for channels at this time,

you can select Skip Scan or press OK/► to stop the

scanning process, and perform the channel scan later in the

Setup menu.

6. The screen will change to show the progress of the

process.

7. When the scanning is nished, the unit has completed the

Initial Setup.

8. Press CLEAR to exit the Wizard and begin watching TV.

Initial Setup

Please select your language:

Language

NextSelect

Español

Français

English

Initial Setup TV Location

TV Location

Retail

Home

Back NextSelect

This mode is Energy Star compliant.

Initial Setup Time Zone

Please select your time zone:

Alaska

Pacific

Hawaii

Mountain

Central

Eastern

Atlantic

Newfoundland

EASTERN

Back NextSelect Exit

CLEAR

Initial Setup Tuner

Please select your tuner mode:

Cable/Sat

Antenna

Back NextSelect Exit

CLEAR

Initial Setup Channel Scan

First, please connect Cable/Sat or

Antenna. Start Channel Scan

now?

If you skip this step, the

Channel Scan could be performed

in Setup menu later.

Skip Scan

Scan

Back NextSelect Exit

CLEAR

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TCL LE39FHDF3300 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info