Bedienungsanleitung TCL LE43FHDF3300 (Seite 15 von 26) (Englisch)

794243

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Menu Operation

Frequency Range: displays the different graphic

equalizer names set for each sound preset option.

Choose a band and make adjustments. When

making adjustments, the Equalizer option

automatically changes to Personal. Press ◄/►

to select the desired frequency (100Hz, 300Hz,

1KHz, 3KHz, 10KHz) you wish to adjust. Use

▲/▼ to adjust the level. When you have nished

adjusting the levels, press MENU to exit.

Balance: adjust the amount of audio sent to the left

and right speakers.

Surround: option On/Off. When turned on, this

option enables a mode which simulates a surround

sound effect.

Speaker: option On/Off. When you select the Off

option, the sound speaker on the TV will be turned

off.

SPDIF Type: this option controls the type of audio

stream sent to the Digital Audio Output jack.

Available options are Dolby Digital, PCM, or Off.

Auto Volume Control: option On/Off. This option

reduces the annoying blasts in volume that often

occur during commercial breaks, and also amplies

softer sounds in program material, eliminating the

need for constant volume adjustment.

Analog TV Sound: this option controls the manner

in which the sound comes through your speakers.

Options available vary according to the input

selected.

Note: The Analog TV Sound option is only available

for analog channels.

Mono (available for regular TV viewing only):

this option plays the sound in mono only. Use

this setting when receiving broadcasts with weak

stereo signals.

Stereo : this option splits the incoming stereo

audio signal into left and right channels. Most TV

programs and recorded materials have stereo

audio. The word “Stereo” appears in the Channel

Banner when you tune to a program that is

broadcast in stereo.

Second Audio Program (SAP): this option plays

the program’s audio in a second language, if

available. The letters “SAP” appear in the Channel

anner when you tune to a program that is broadcast

with SAP information. SAP audio is broadcast in

mono only. SAP is also used to broadcast a

program’s audio with descriptions of the video for

the visually impaired.

Default Audio Language: choose the language you

prefer for dialog on digital channels. If the preferred

language is not broadcasted with the program,

then the TV plays the default audio for the program

(usually English in the US). There are 3 available

default languages (English, French, Spanish).

Note: The Default Audio Language option is only

available for digital channels.

Current Audio Language: press ◄/► to choose

from the list of languages available for the program

you’re watching. The language chosen becomes

your preferred language for all digital channels until

you turn the TV off. If the language chosen is not

being broadcasted with a program, the TV plays the

default language for the program (usually English in

the US).

Note: The Current Audio Language option is only

available for digital channels.

Setup Menu

The Setup Menu allows you to congure the TV

with your preferences. Press MENU on the remote

to open the Main Menu. Press ▲/▼ to select Setup;

then press OK/► to display the following options:

(Refer to Figure 3.)

Signal Type: choose the type of signal (Cable/Sat

or Antenna) you have connected to the ANT/

CABLE/SAT IN.

Channel Scan

When you perform a Channel Scan, your TV

searches for channels with signals and stores the

channel information in the Channel List. Then, as

you watch TV and press CH+ or CH-, your TV goes

to the next or previous channel in the Channel List

and skips the channels that do not have signals.

If the TV signal source changes – for example, if you

change from an outdoor antenna to cable TV – you

will need to rescan for channels.

To automatically scan for channels:

1. After choosing a signal type, press ▲/▼ to

highlight Channel Scan.

2. Press OK/► to start the scan. You can see the

search progress and how many channels are

found in the on-screen menu. (Note: If you wish

to stop the search, press the CLEAR button.)

3. After the scan is complete, press the MENU

button to return to the previous menu, or press the

CLEAR button to close the menu.

Channel Skip

You can hide channels in the Channel List. Then,

when you press the CH+ or CH- button, the TV will

skip the hidden channels. You can still tune to these

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TCL LE43FHDF3300 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info