Bedienungsanleitung TCL LED55D2900S (Seite 9 von 32) (Englisch)

794207

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

General Operation

First Time Setup involves selecting all the settings

required to be able to search for and store all the

channels you can receive. Make sure that the television

is switched on and follow all the steps in turn specified

hereafter.

The first time you switch the set on, the First Time Setup

wizard opens, which guides you through the initial setup

process.

Press the up or down direction button to select Auto

Scan and press the OK or right direction button to

start the search automatically. All available TV

programmes are stored. This operation takes a few

minutes. The display shows the progress of the search

and the number of programs found.

Note: to prevent the channel setup process from being

interrupted, wait for the message indicating that the

setup is completed.

In this step, you can also select Exit to skip the

channel search progress. But when you turn the TV on

next time, the prompt on the screen will remind you to

do the channel scan first.

Note: the Store mode does not satisfy the MEPS

certification, suggest selecting Home.

First Time Setup

2. Press the left or right direction buttons to select the

desired item, then press the OK button to open the

corresponding submenu.

3. In submenus, use the up or down direction button to

select menu options, use the left or right direction button

to set functions or change values. Use the OK button

to activate a setting. Use the OK or right direction button

to open the corresponding submenu.

4. Press Menu to return to the previous menu or press

Exit to close the menu.

Using Menu System

This section explores the menus of your TV. Each menu

is outlined and detailed to help you get the most from

your TV.

To access the menu system:

1. Press the Menu button to display the main menu.

select Channel>Tuner Type(Satellite, Antenna, Cable),

then press the left or right direction button to select the

tuner type.

2.Select Auto Scan, then press the OK or right

direction button to enter.

3. Select DTV & ATV (or DTV or ATV),

then press the up/down direction button to highlight the

Start, press the OK or right direction button to start the

automatic search process.

The search may take a few minutes. During the

process, you can press Menu or Exit to abort halfway.

Press the Menu button to display the main menu, and

Auto Scan

This option allows the TV to search for, find and store all

the available analog and digital channels.

Follow all the steps in turn specified hereafter.

This allows you to update all available channels, without

altering the sorting of existing channels. (only available in

DTV mode)

1. Display the Channel menu, press the up or

down direction button to highlight Auto Channel

Update option.

2. Press the left or right direction button to select On/Off

to update the channel.

Automatic Update

First Time Setup

Auto Scan

Hue

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TCL LED55D2900S Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info