Bedienungsanleitung TCL TPW08CR19 (Seite 7 von 112) (Französisch, Spanisch)

766622

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

1. Power button – press the on the control panel or the remote control to turn the air

conditioner on and o. Never turn the appliance o by unplugging from the power source.

Always press the power button, then wait for a few minutes before unplugging. This allows the

appliance to perform a proper shutdown.

2. Cool Mode – press the on the control panel or remote until the Cool mode is lit. Select

the target temperature 64°-90° F (18°-32° C) by pressing the or button until the

corresponding value is displayed. Select the required fan speed by pressing the fan

speed button.

3. Dry Mode – press the on the control panel or remote until the Dry symbol appears, “dh” will

appear on the screen. In this model, the default fan speed is low, and cannot be modiﬁed.

4. Fan Mode – press the on the control panel until the Fan symbol appears. You can then

select your desired fan speed, either High or Low .

5. Sleep Mode - press the SLEEP button on the remote control (there is no sleep mode on the

control panel). This function is useful when you are sleeping as it gradually reduces operation

of the appliance. To set this function correctly, select the cool or dry mode as described above.

Press the button. The appliance operates in the previously selected mode.

When you choose the sleep function, the brightness of the screen is reduced and fan speed

is lowered.

The SLEEP function maintains the room at optimum temperature without excessive ﬂuctuations

in either temperature or humidity with silent operation. Fan speed is always at Low, while room

temperature and humidity vary gradually to ensure comfort.

When in COOL mode, the selected temperature will decrease by 1° per hour in a 2 hour period.

This new temperature will be maintained for next 6 hours and then the appliance will turn o. The

SLEEP function can be canceled at any time during operation by pressing the “Sleep”, “Mode” or

“Fan Speed” button.

In FAN or DRY mode, SLEEP function cannot be set.

1. Directional Louvers – Control the direction of the

air ﬂow by manually adjusting the deﬂectors to the

desired direction. In shipping, the vents are closed

and must be opened by pushing on the bottom left

hand corner deﬂector to open.

Note: The Louver Swing Button is on the remote,

however that feature is not available on this model.

Setting the Timer using the control panel or remote control

Programming Start Up –

• Turn on the appliance, choose the mode you want, for example cool, 72°F, high fan speed.

• Turn o the appliance.

• Press the Timer button, the symbol and the screen will display 1-24 hours.

• Press several times until the corresponding time is displayed.

• Wait about 5 seconds, the timer will be active, then the “Timer” symbol is displayed on

the screen.

• Press the Timer button again, the timer will be canceled, and the “Timer” symbol will disappear

from screen.

Horizontal

Deﬂector Vertical

Deﬂector

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TCL TPW08CR19 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info