Bedienungsanleitung TCL TPW08CR19 (Seite 13 von 112) (Französisch, Spanisch)

766622

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

SWING Function

The swing function on the remote can be used to allow the air deﬂector to swing continuously.

To enable press the power (Insert button image) on the remote to enable the deﬂector to swing

continuously. Press again to cause the deﬂector to stop in the desired position.

1. Power button – press the on the control panel or the remote control to turn the air

conditioner on and o. Never turn the appliance o by unplugging from the power source.

Always press the Power button, then wait for a few minutes before unplugging. This allows

the appliance to perform a proper shutdown.

2. Cool Mode – press the on the control panel or remote until the Cool mode is lit. Select

the target temperature 18° - 32°(64°-90°) by pressing the or button until the

corresponding value is displayed. Select the required fan speed by pressing the fan

speed button.

3. Dry Mode – press the on the control panel or remote until the Dry symbol appears, “dh”

will appear on the display. In this model, the default fan speed is low, and cannot be selected.

4. Fan Mode – press the on the control panel until the Fan symbol appears. You can then

select you desired fan speed, either High or Low .

5. Sleep Mode - press the SLEEP button on the remote control (there is no sleep mode on the

control panel). This function is useful when you are sleeping as it gradually reduces operation

of the appliance. To set this function correctly, select the cool or dry mode as described

above. Press the button. The appliance operates in the previously

selected mode.

When you choose the sleep function, the brightness of the screen is reduced and fan speed

is lowered.

The SLEEP function maintains the room at optimum temperature without excessive ﬂuctuations

in either temperature or humidity with silent operation. Fan speed is always at Low, while room

temperature and humidity vary gradually to ensure your comfort.

When in COOL mode, the selected temperature will decrease by 1° per hour in a 2 hour period.

This new temperature will be maintained for the next 6 hours and then the appliance will turn o.

The SLEEP function can be canceled at any time during operation by pressing the “Sleep”, “Mode”

or “Fan Speed” button.

In FAN or DRY mode, SLEEP function cannot be set.

Setting the Timer using the control panel or remote control

Programming Start Up –

• Turn on the appliance, choose the mode you want, for example cool, 72°F, high fan speed.

• Turn o the appliance.

• Press the Timer button, the symbol and the screen will display 1-24 hours.

• Press several times until the corresponding time is displayed.

• Wait about 5 seconds, the timer will be active, then the symbol is displayed on

the screen.

• Press the Timer button again, the timer will be canceled, and the symbol will disappear

from screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TCL TPW08CR19 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info