Bedienungsanleitung TCL U40E5800FS (Seite 9 von 19) (Englisch)

794187

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

Menu Operation

Using Menu System

a setting. Use OK/ to open the corresponding submenu.

1. Press Menu to display the main menu.

2. Press to select the desired item, then press

OK button to open the corresponding submenu.

3. In submenus, use to select menu options, use

to set functions or change values. Press OK to activate

4. Press Menu to return to the previous menu or press

Exit to close the menu.

Picture Menu

The menus for adjusting the picture are used to obtain

the best picture settings according to your preference,

the type of program you are watching and the ambient

lighting. (see figure 3.)

Display the main menu by pressing Menu and select

Picture, then press OK to confirm. The Picture options

are as below:

Note: some options may not be available for certain

signal sources.

Picture preset: use to scroll through the picture

preset settings: Personal, Movie, Standard, Dynamic

and Studio.

This section explores the menus of your TV. Each menu

is outlined and detailed to help you get the most from

your TV. To access the menu system:

// /

Brightness: adjusts the brightness of the picture.

Contrast: adjusts the difference between light and

dark areas of the picture.

Saturation: adjusts the richness of colour.

Note: this function is not available in VGA mode.

Sharpness: adjusts the crispness of the edges in the

picture.

Note: this function is not available in VGA mode.

Color temperature: adjusts the color temperature of

the picture. Use to scroll through the color settings:

Cool for a more blue palette of picture colors; Normal;

Custom; Warm for a more red palette of picture colors.

Screen mode: use to select the picture size.

(Note: You are recommended to use the full screen

mode. Do not use the display mode with black bars

on both sides of the picture (such as 4:3) for a long time,

otherwise the TV screen may be damaged permanently.)

Auto format: use to select On or Off, when On is

selected, the TV will display the picture according to

HD Signal's format.

Note: Auto format is available only in TV and AV mode.

Advanced settings: press to display its submenu.

Use to select the items such as Noise reduction

to obtain a clearer picture.

OK/

Note: some options may appear in the next page of

Picture menu, you can press to switch.

Sound Menu

Display the main menu by pressing the Menu button and

select Sound, then press OK to confirm. The Sound

menu appears with the following options(see figure 4):

Sound preset: press to display its submenus:

- Sound preset: use to select a sound type(e.g.

Rock, Pop) directly. Use to select the desired

frequency range(e.g. 100Hz, 300Hz), use to

adjust the level.

Balance: use to balance the sound between the

left and right speakers.

Audio delay: if the sound output does not match the

picture, press to adjust the delay time to

synchronize the sound with the picture.

Wide stereo: use to switch On or Off.

Auto volume control select On mode to reduce

the annoying blasts in volume during commercial

breaks, this also amplifies softer sounds in program

material. Eliminates the need to constantly adjust

the volume.

Audio description it refers to an additional narration

track for the blind and visually impaired viewers of

visual media, including television programmes and

movies. The description narrator talks through the

presentation description what is happening on the

screen during the natural pauses in the audio(and

during dialogue if deemed necessary).

1. You can use this function if the current broadcast

contains audio description.

2. You can turn on the audio description on or off in

the Audio Description menu.

Sound type use to select a sound type from the list

Note: the options offered depend on the programme

you are watching.

OK/

To display the pictures from different source inputs side

by side. Note that one window is for both analog and

digital TV inputs, the other is for VGA, HDMI and CMP

inputs. See figure 5. (Note: AV input is not available for

AV on both windows.)

1. Display main menu by pressing Menu. Select PAP

and press OK to confirm.

2. Select the PAP item, and press to turn on/off

PAP function.

3. When On is selected, select TV position, press

to reposition the TV window.

PAP Function

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TCL U40E5800FS Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info