487603
14
Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
Special functions
Multiroom-operation
select the SMR to control.
The WAP system can operate with various SMR device controlled though one BRC!
By this multiroom feature, you only need to use one BRC – e.g. while you walk in
your house – to control a number of SMR devices in different rooms.
The menu for selecting the SMR for control you can reach by
the right soft key (4) in the main screen. This is the quick
way for multiroom selection. The actually selected SMR is
displayed on top position of the SMR device list.
Precondition for any change between SMR devices is their
existence in the SMR device list. When there are already
various SMR devices avaiable, scroll to the desired SMR
name and hit the OK (7) button to activate the connection.
The BRC then releases control of the current SMR device –
playback of the current device continues! – and changes
over to control the new selected SMR.
For the settings of the SMR device list you can find further
functions in the settings menu under the point Multiroom. There, you will find
functions for adding new SMR devices, to erase from the device list and to rename
the SMR devices upon demand. For more informations please read the section
Multiroom.
Note: in case the new selected SMR device you aim for control is out of reception
area of your BRC, there will be a warning screen.
In case you walk away from your currently connected SMR, leaving the reception
area of the connection between BRC and SMR, the above mentioned warning
screen appears, too.
This warning screen enables you to reconnect to current SMR (softkey 4), or to
select another SMR (softkey 2) for control.
If you just have one SMR in your setup, please move the BRC to another position
closer to your SMR device to recover the control connection.
The allowable distance between BRC and SMR dependas on your local conditions.
In typical home environment it is possible to reach 15 meters distance with some
walls between BRC and SMR. But this is not to be guaranteed due to very different
wall/ceiling materials. Outside the house, the operational distance can be multiplied.
14
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Teac WAP-2200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Teac WAP-2200

Teac WAP-2200 Bedienungsanleitung - Deutsch - 22 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info