Bedienungsanleitung Teac wap 4500 (Seite 21 von 30) (Englisch)

160796

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Network:

Your home network may use a router that allows computers to be networked and to

share files. WAP-4500 can playback Internet Radio through network connection.

WAP-4500 can also playback audio files from any of the computers in the network,

as long as they provide acces by a Media server software as provided on the

installation CD.

Attention: WAP-4500 cannot find and playback your audio files, stored on a

networked PC without the audioserver installed. Before playback from network

computers, ensure properly installed media server software!

The default settings for the WAP-4500 and the instructions below are designed to

make accessing a wireless network easier. If you need to change the settings on

your router to access it, be sure the settings you choose are secure. Refer to the

router user documentation for more information.

Network Interface

You have the choice between LAN (wired) and WLAN

(wireless). Scroll to the required setting and press OK (7). To

return to network settings screen, push the softbutton “return

to previous screen” (2). Dependant from your selected

network type, the appropriate setting items are shown, not

available items are greyed out..

Wireless Connection (WLAN)

Back to network settings screen, you have the choice to

setup your WLAN guided by the assistance of a wizard or

setup the items manually.

By default, most routers are set to DHCP (Dynamic Host Configuration Protocol).

This means the router assigns IP addresses automatically to the network devices,

you do not have to manually assign (static) IP addresses. The wizard is based on

DHCP system.

Note: if your network is not based on DHCP but requires static IP settings, you can

direcly scroll down to IP Settings and continue. See IP Settings.

Wireless Lan Setting Wizard

move the cursor to Wireless Lan Setting Wizard and press OK (7). The wireless

LAN site survey starts automatically

Scroll down to the appropriate secure WLAN AP (SSID) for your desired WLAN

connection, if prompted for confirmation press OK (7).

Enter the security key on the WEP Key screen (the key is the same as the key for

your router). You have to input the key by the screen keyboard, operated by the

cursor buttons. Please care for correct key (upper or lower case letters etc.)! Each

letter confirm by OK (7). When the key is complete, move to the ENTER symbol in

the screen and press OK (7). Then you will be prompted whether the key is ASCII

(common) or Passphrase type. Select and press OK (7). The wizard is finished

here. You will be back on settings main screen and a display window confirms the

WLAN setting is finished.

You may also open the Security Setting of Advanced WLAN Setting to configure

the WLAN security setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Teac wap 4500 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Teac wap 4500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info