Bedienungsanleitung Team DAI 8 (Seite 10 von 36) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

486915

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don‟t change the page numbering. Keep the

language integrity.

10 TEAM DAI 8 - 090225

Assembly page 10/36

Fax +32 2 359 95 50

 Turn on the iron.

 Turn the temperature dial clockwise into the required position.

 Turn variable steam/dry dial between and for minimum steam or on the position

for a larger amount of steam.

 Set the iron on its heel and wait until the temperature indicator goes out.

! Set the temperature dial within the steam range. If temperature setting is too low, water may

drip from soleplate.

! Check the garment label before ironing because some cloths may be damaged when

exposed to steam or water.

SPRAY

 Produces a mist for removing stubborn creases.

 Spray can be used at any temperature setting and during either dry or steam pressing.

Press down the spray button to spray.

! Be sure to check the garment label for care instructions. Some fabrics may be damaged when

exposed to steam or water.

CLEANING

After using the iron for a long period of time and regularly (at least once every month) you can

clean your iron by using the self-cleaning function as follows:

 Fill the water tank halfway and put the iron on its heel.

 Set the temperature dial to its highest position and let the iron heat up until the pilot light

goes out.

 Unplug the iron, turn the steam button to the self-cleaning position and shake the

iron to the left and to the right above a sink. Hot water and steam will come out of the

soleplate. This way, dust particles can be eliminated.

 When the water tank is empty, turn the steam button to .

 Pour water in the water tank, let the iron heat again and pass the soleplate on an old but

clean cotton cloth. The water remaining in the soleplate will evaporate, which will

complete the cleaning process.

 To clean the plastic parts of the iron, use a humid cloth.

WHEN YOU HAVE FINISHED IRONING

 Turn temperature dial to "MIN" and unplug iron from electrical outlet.

 With soleplate facing away from you, turn iron upside down to empty water.

 Then store the hot iron on its heel rest so that any remaining moisture will evaporate.

PROTECTION OF THE ENVIRONMENT– DIRECTIVE 2002/96/EC

In order to preserve our environment and protect human health, the waste electrical and

electronic equipment should be disposed of in accordance with specific rules with the

implication of both suppliers and users. For this reason, as indicated by the symbol on the

rating label or on the packaging, your appliance should not be disposed of as unsorted

municipal waste. The user has the right to bring it to a municipal collection point performing

waste recovery by means of reuse, recycling or use for other applications in accordance with

the directive.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Team DAI 8 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info