Bedienungsanleitung Team DAI 9 (Seite 10 von 44) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

486916

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

        

language integrity.

10 TEAM DAI 9 - 100210

Assembly page 10/44

Fax +32 2 359 95 50

 Turn the variable steam dial between and for minimum steam or on the position

for a larger amount of steam.

 Set the iron on its heel and wait until the temperature indicator goes out.

Caution: Set the temperature dial within the steam range ('' or ''). If the temperature

setting is too low, water may drip from the soleplate.

Check the garment label before ironing because some cloths may be damaged when

exposed to steam or water.

SPRAY

 Produces a mist for removing stubborn creases.

 Spray can be used at any temperature setting and during either dry or steam pressing.

Press down the spray button to spray.

DESCALING

To descale your appliance, use products made especially for this purpose that you will find in

shops and follow their instruction manual carefully.

CARE AND CLEANING

 Always unplug the appliance and let it cool down before cleaning.

 To clean the plastic parts of the iron, use a damp cloth.

 To clean the soleplate, make sure you use a product made especially for this purpose.

Never use abrasive products.

WHEN YOU HAVE FINISHED IRONING

 Turn the temperature dial to "MIN" and the steam dial to and unplug the iron from

the electrical outlet.

 With the soleplate facing away from you, turn the iron upside down to empty the water.

 Then store the hot iron on its heel rest so that any remaining moisture will evaporate.

SELF CLEANING

-

The harder the water, the more the iron should be self-cleaned.

1. Open the filling opening and fill the water tank up to the MAX level, then gently close

the filling opening.

2. Set the temperature dial to MAX.

3. Insert the mains plug into the wall socket.

4. Put the iron heel up until the temperature indicator light goes out. Then set the

temperature dial to position MIN.

5. Hold the appliance horizontally over a sink, then remove the steam control knob

enabling the iron to self clean.

6. Boiling water, steam and impurities will be ejected from the holes in the sole plate.

Move the iron forwards and backwards while doing so, so that every hole of the sole

plate is cleaned.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Team DAI 9 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info