Bedienungsanleitung Team DW 1 (Seite 20 von 45) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

486942

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

Generated by Unregistered Batch DOC TO PDF Converter

2011.3.804.1511, please register!

Copies of the I/B. Please reproduce them without any changes

except under special instruction from Team International

BELGIUM. The page must reproduced and folded in order to

obtain a mini booklet B5 (+/- 150 mm width x 210 mm height).

The page must be folded in order to keep the good numbering



numbering. Keep the languages integrity.

Assembly page 20/45

Fax +32 2 359 95 50



USING THE ECONO FEATURE

The ECONO feature enables dishes to be washed at the temperature of the water as it comes from the



To activate this feature, use the HOT/ECONO button on the control panel, item 6.

Depressing the button OUT activates the ECONO option, and the indicator light is not illuminated.

When the ECONO feature is activated, drying time for the dishes will be increased. Leaving the

dishwasher door partially open after the program is complete will help since humidity from within

can escape.

Push the door release button (item 3) and the door pops opens to a pre-set position.

OPERATING INSTRUCTIONS

1. Ensure the installation is correctly made in respect of water and electricity supply.

2. Depress the door release button (item 3) to open the door.

3. Ensure the filter is free from debris.

4. Prepare dishes, cutlery, and glasses as above.

5. Place dishes etc on the rack and the cutlery in the basket.

6. Fill the detergent area on inner door panel (approx. 7 grams) so that the detergent is level with

the door skin. Closing the door will sprinkle the detergent inside the appliance, and the detergent

will be activated during the washing process.

7. Close the door firmly.

8. Ensure the water and power supplies are ON.

9. Select the program (item 8), and the appropriate temperature (item 6).

10. Depress the ON/OFF button (item 7).

11. The dishwasher stops automatically at the end of the program.

IMPORTANT NOTE

At the beginning of each cycle, the dishwasher always starts in the "drain" mode. This is because the

drain pump always retains a small amount of water (in the sump) from the previous (last) cycle. This

is necessary to keep the pump primed.

Therefore, don't be alarmed if you see a small amount of water being pumped out from the drain hose

prior to the start of the regular wash cycle.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Team DW 1 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info