Bedienungsanleitung Team FE 3 (Seite 8 von 29) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

486956

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

Generated by Unregistered Batch DOC TO PDF Converter

2011.3.804.1511, please register!

Copies of the I/B. Please reproduce them without any changes

except under special instruction from Team International

BELGIUM. The page must reproduced and folded in order to

obtain a mini booklet B5 (+/- 150 mm width x 210 mm height).

The page must be folded in order to keep the good numbering

when you turn the page of the I/B . Don‟t change the page

numbering. Keep the languages integrity.

Assembly page 8/29

Fax +32 2 359 95 50



 Please pay attention that the rasp is very sharp-edged when you clean it.

(*)

Competent qualified service: after sales department of the producer or importer or any person who

is qualified, approved and competent to perform this kind of repairs in order to avoid all danger. In

any case you should return the appliance to this service.

UK STYLE PLUG WIRING INSTRUCTIONS (IN THE UK ONLY)

This product must only be used from a 13 amp power socket. If a BS1363 approved 13 amp plug is

used, it should be fitted with a 13 amp fuse. The wires on the power cord are colour coded:

blue = neutral, brown = live, green or green & yellow = earth.

The blue wire must be connected to the terminal marked N or coloured in black.

The brown wire must be connected to the terminal marked L or coloured in red.

The green (& yellow) wire must be connected to the terminal marked E or coloured in green (&

yellow).

IMPORTANT INFORMATION

This appliance is not for professional use. You should follow the requested breaks. Failure to follow

this instruction carefully may result in damage to the motor. Please refer to the rating label for the

maximum continuous usage time (KB/MAX xx min or xx is the maximum usage time). The breaks

should last at least 10 minutes.

BEFORE USING FOR THE FIRST TIME

 Wash the parts of the product which will come into contact with the fruit.

DISMANTLING AND ASSEMBLING

Be sure to remove plug from electrical outlet first.

 Turn off the switch, open the locks (J)

 Remove the protective cover (C)

 Push the Motor Casing (H) downwards and remove the Separating Unit (E) then pull the Grater

& Filter Unit upwards.

 Place the Separating unit (E) on the motor housing (H), push with both hands on the Separating

unit it is clicked into place.

 Insert the Grater, turn it clockwise until sits securely.

 Mount the protective cover and fasten the Locks.

 Put the Residue Container (I) under the Residue Spout (G), then set the Juice (L) under the Juice

Spout (F), or fit the Spare Pat (M) instead for a larger Cup.

OPEARATING INSTRUCTIONS

 This appliance is equipped with a safety system. If the cover is not correctly in place or the locks

unfastened, the appliance will not function.

 Before plugging make sure the switch is OFF and the Locks are fastened correctly.

 Cut fruits into small pieces so as to be fitted into the feeding funnel.

 Place a glass or jug under spout.

 Switch on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Team FE 3 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info