Bedienungsanleitung Team hc 17 r (Seite 11 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

401510

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don’t change the page numbering. Keep the

language integrity.

11 TEAM HC 17 R - 091125

Assembly page 11/56

Fax +32 2 359 95 50

 When you decide to throw away the appliance, make sure to remove the battery and to

dispose of it in an ecological manner. For more information contact your town authorities.

 BE CAREFUL NOT TO TOUCH THE ACCUMULATOR OR THE LEAKING LIQUID.

(*)

Competent qualified electrician: after-sales department of the producer or importer or any

person who is qualified, approved and competent to perform this kind of repairs in order to

avoid all danger. In case of need you should return the appliance to this electrician.

CONNECTING

 The charging base can be connected to any voltage outlet - even to shaver sockets -

between 230-240 volts ac (-).

 Place the rechargeable hair clipper, facing the front onto the charging base.

 The red charge indicator will light up, when the power unit is inserted on the plugged-in

charging base.

 The hair clipper may warm up somewhat during recharging. This has no significance on the

unit's operation. Overcharging is impossible.

 To maintain the hair clipper's full performance, it should always be stored on the charging

base after use.

PRESERVING THE RECHARGEABLE BATTERY

To maximise the capacity and life of the rechargeable battery, it should be fully charged for 16

hours before the first use and then fully discharged by using. Then recharge to full capacity (6

hours). This discharging/charging procedure should be done every six months.

BEFORE YOU START

 Make sure that your clipper is clean, properly oiled and in perfect working condition.

Caution: if the blade is not oiled correctly, the appliance will not work properly.

 Place a towel around the neck of the person whose hair is to be cut to prevent hair from

falling inside the collar.

 Have the person sit on a chair so that his/her head is at your eye’s level.

 Comb the hair thoroughly and hold the clipper in a relaxed, comfortable grip. This will help

you maintain an accurate cutting control.

OIL (see page 2: A)

To maintain your clipper in peak condition, the blades should be oiled every few haircuts. Do

not use hair oil, grease or oil mixed with kerosene or any solvent, as the solvent will evaporate

and leave the thick oil which may slow down the blades' motion.

MOUNTING (see page 2: B)

 To mount the comb attachment, put the locking knob in  position (see page 3, E 24)

and insert the comb attachment as described on page 2, B. The "clicks" that you can hear

correspond to the different cutting length settings. Once the comb attachment stops, it

means that it is in position "1".

 To remove the comb attachment, proceed the other way around, still making sure that

the locking knob is in  position.

 Once you have chosen the cutting length, put the locking knob in  position to block the

comb attachment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Team hc 17 r Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info