Bedienungsanleitung Team KA VT 13 (Seite 8 von 22) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

487056

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don’t change the page numbering. Keep the

language integrity.

8 TEAM KA VT 13 – 061026

Assembly page 8/22

Fax +32 2 359 95 50

2. When the appliance is properly assembled on its base, loosen the cap (2) and the guard

mounting ring (4) from the motor housing (7).

3. Position the rear guard (5) firmly against the motor housing (7) and fasten by turning the

guard mounting ring (4) clockwise tightly.

4. Push the blade (3) along the motor shaft (6). Fasten it firmly with the cap (2) by turning it

counter clockwise.

5. Fit the front guard (1) and the rear guard (5) together with the clips provided. Attach the

front guard (1) to the rear guard (5) with the position fixer located on the front guard rim,

and then fit them together with the clips provided.

6. To ensure that it is impossible to have access to the fan blade without using a tool, a screw

is provided with this appliance in order to attach both parts of the mesh guard together.

This screw must be tightened on the lower part of the guards. We cannot be held

responsible for any injuries in case this screw had not been tightened before using the

appliance.

USE

 This appliance is equipped with 3 ventilation speeds. To switch on the appliance, press the

button corresponding to the desired speed. To switch it off, press the “0” button.

Speeds:

0 = OFF

1 = Low

2 = Medium

3 = High

 This appliance also has an oscillation function:

 Push the oscillation knob (8) to switch on the oscillation.

 Pull the oscillation knob (8) to stop.

 It is also possible to tilt the upper part of the appliance in order to adjust the airflow

direction vertically.

CLEANING AND CARE

 Always unplug the appliance before cleaning.

 To remove dirt from the plastic surfaces, use a lightly moistened cloth.

 Use a vacuum cleaner to remove the dust from the guards without having to disassemble

them.

 Never immerse the appliance in water or any other liquid.

PROTECTION OF THE ENVIRONMENT– DIRECTIVE 2002/96/EC

In order to preserve our environment and protect human health, the waste electrical and

electronic equipment should be disposed of in accordance with specific rules with the

implication of both suppliers and users. For this reason, as indicated by the symbol on the

rating label or on the packaging, your appliance should not be disposed of as unsorted

municipal waste. The user has the right to bring it to a municipal collection point performing

waste recovery by means of reuse, recycling or use for other applications in accordance with

the directive.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Team KA VT 13 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info