Bedienungsanleitung Team KA VT 3 (Seite 8 von 28) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

487051

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don’t change the page numbering. Keep the

language integrity.

8 TEAM KA VT 3 071011

Assembly page 8/28

Fax +32 2 359 95 50

ASSEMBLY (see picture page 2)

 Before mounting the appliance, make sure it is unplugged.

 Put the rear base (3) (part with a semi-circle shaped alcove) onto the motor support (4).

 Pass the power cord (1) through the central gate of the rear base(3) and insert it in the

wire casing.

 Firmly clamp the rear base (3) with the front base (2) (part with a triangle-shaped alcove),

coordinate the position of the motor support.

 Then tighten the two nuts, and put the appliance on a dry firm and level surface.

OPERATION

Plug in the appliance and select the desired speed setting by pressing one of the speed knobs

(7)

0 -Stop

1 - Low

2 - Medium

3 -High

For a continuous operation, put the timer (6) in ON position. If the timer is set at off position the

fan will not operate even if you push the speed knobs (7).

PROGRAMMING

 This appliance is equipped with a timer that allows you to programme the operation

duration.

 To set the operation duration (0 to 120 minutes), turn the timer clockwise to the desired

duration (e.g. 80 means that your appliance will function during 80 minutes).

 When the timer rotary switch reaches the OFF position, the appliance switches off

automatically.

OSCILLATION

You can switch on the oscillation of the tower by pressing the oscillation knob (8). This system

will allow spreading the airflow around the room in order to refresh as big a volume as possible.

The wind direction can also be changed manually when the automatic oscillation is switched

off. Simply turn the tower in the desired direction; it is not necessary to move the base of the

appliance.

CLEANING AND CARE

 Always disconnect the power supply cable from the power supply before carrying out any

cleaning operation.

 To remove dirt from the plastic surfaces, use a cloth moistened with a little water. Never

use abrasive products, as these could damage the appliance.

 Use a vacuum cleaner to remove the dust from the ventilation grille without having to

disassemble it.

 Never immerse the fan in water or any other liquid.

PROTECTION OF THE ENVIRONMENT– DIRECTIVE 2002/96/EC

In order to preserve our environment and protect human health, the waste electrical and

electronic equipment should be disposed of in accordance with specific rules with the

implication of both suppliers and users. For this reason, as indicated by the symbol on the

rating label or on the packaging, your appliance should not be disposed of as unsorted

municipal waste. The user has the right to bring it to a municipal collection point performing

waste recovery by means of reuse, recycling or use for other applications in accordance with

the directive.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Team KA VT 3 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info