Bedienungsanleitung Team RC 2 (Seite 15 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

487218

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced and

folded in order to obtain a booklet A5 (+/- 148.5 mm width x

210 mm height). When folding, make sure you keep the good

numbering when you turn the pages of the I/B. Don’t change

the page numbering. Keep the language integrity.

Assembly page 15/40

Fax +32 2 359 95 50

(*)

Competent qualified electrician: after sales department of the producer or importer or any

person who is qualified, approved and competent to perform this kind of repairs in order to

avoid all danger. In any case you should return the appliance to this electrician.

IMPORTANT INFORMATION

This appliance is not for professional use. You should follow the requested breaks. Failure to

follow this instruction carefully may result in damage to the motor. Please refer to the rating

label for the maximum continuous usage time (KB xx min or xx is the maximum usage time). The

breaks should last at least 10 minutes. Any wrong use will invalidate the guarantee.

USE

 To use the processor (B) the safety lid (1) must be locked into place. Also make sure the

appliance is unplugged, that the on/off & speed control switch is in "0" position.

 Place the processor bowl (13) onto the bowl shaft (7).

 Make sure the three tips around the bowl shaft are inserted into the three slots on the

bottom of the processor bowl.

 The bowl lid with funnel (12) must be locked into the bowl lid locking slot (6).

 Plug in the appliance

 Turn the ON/OFF & speed control switch (8) either to “I” (slow speed) or to “II” (fast speed),

depending on the preparation you make.

 You can also use the pulse button (10) but only if you turn the ON/OFF speed control

switch to “0”. Press this button to use the appliance punctually. A light press will make the

motor work slowly, while a heavy press will make it work faster.

 You can also use the auto clean button (9) but only if you turn the ON/OFF speed control

switch to “0”. With this function, the motor will only work slowly. This button is used to clean

the blender bowl (see the "Cleaning" section).

 Depending on the type of usage, different accessories should be used, according to the

below instructions.

FUNCTIONS

a) Grating / Slicing / Chipping

 Make sure the appliance is unplugged, that the on/off & speed control switch is in "0"

position and that the safety lid (1) is closed.

 Place the processor bowl onto the bowl shaft. Make sure the three tips around the bowl

shaft are inserted into the three slots on the bottom of the processor bowl.

 For grating, insert the spindle (14) into the centre of the reversible grating/slicing disk (15),

with the grating blade (16) side facing the lid with funnel (12). For that the three tips around

the spindle have to penetrate the three slots around the centre of the disk. Then rotate the

disk anti-clockwise by gripping the spindle as shown in the figure a and go as far as it can in

order to lock it into the disk.

 For slicing, the slicing blade (17) side must be facing the lid with funnel (12).

 For chipping, use the chipping disk (18) with the blade side facing the lid with funnel (12).

 Once mounted, place the disk on the bowl shaft and add the lid with funnel as described

in the section "Use".

 Cut the potatoes, carrots, cucumbers etc… into pieces and place the ingredients into the

funnel of the bowl lid.

 Use the pusher (11) to push food down the funnel. Never use your fingers or any other

utensil.

 Plug in the appliance and turn the ON/OFF & speed control switch to “I” (slow speed) to

start.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Team RC 2 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info