Bedienungsanleitung Team SIS 11 (Seite 12 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

487286

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced and

folded in order to obtain a booklet A5 (+/- 148.5 mm width x

210 mm height). When folding, make sure you keep the good

numbering when you turn the pages of the I/B. Don’t change

the page numbering. Keep the language integrity.

Fax +32 2 359 95 50

As soon as the steam pilot light (12) comes on, press the burst of steam button (6) to have

the steam coming out of the soleplate of the iron. The steam pilot light will go on and off

from time to time, indicating that the appliance is regulating the temperature of the

boiler. Caution: When you use steam for the first time, hold the steam button down for

about one minute to clean out the steam producing system. If you want a continuous jet

of steam, hold the steam button pressed down.

•

When ironing, the pilot light of the iron (1) will go on and off from time to time. This means

that the temperature of the iron is regulated by its thermostat. You can continue ironing.

When you use a lot of steam in a very short time, the steam output is lightly reduced until

your appliance produces enough steam to make up for the difference. This phenomenon

also happens when there is not enough water in the water tank.

When the water tank is running empty, the water refill indicator (13) will come on. If you

want to go on using the steam function, you will have to refill the water tank.

STEAMING IN A VERTICAL POSITION

You have to hang the garment you want to smooth out avoiding the creases and place the

iron in a vertical position at a few centimetres from the item of clothing. Then move the iron

and press the burst of steam button at the same time.

DRY IRONING

For ironing without steam, put the steam switch (11) in the off-position “0” and do not press the

steam button (6).

WHEN FINISHED IRONING

Unplug the appliance and let it cool down.

It is not necessary to empty the water tank.

We recommend placing the iron on its base when you store it. The foreseen place is non-

slip and will not damage the soleplate of the iron.

CLEANING

• The plastic parts of the appliance can be cleaned with a damp cloth.

• To clean the soleplate of the iron, you will find specific products in the shops. Please also

read the instructions of use. Never use abrasive products to clean it.

• Never immerse the appliance in water or any other liquid.

PROTECTION OF THE ENVIRONMENT – DIRECTIVE 2002/96/EC

In order to preserve our environment and protect human health, the waste electrical and

electronic equipment should be disposed of in accordance with specific rules with the

implication of both suppliers and users. For this reason, as indicated by the symbol

on the

rating label or on the packaging, your appliance should not be disposed of as unsorted

municipal waste. The user has the right to bring it to a municipal collection point performing

waste recovery by means of reuse, recycling or use for other applications in accordance with

the directive.

12 TEAM SIS 11 - 110221

Assembly page 12/52

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Team SIS 11 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info