Bedienungsanleitung Team ST 27EC (Seite 10 von 31) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

487323

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

Generated by Unregistered Batch DOC TO PDF Converter

2011.3.804.1511, please register!

Copies of the I/B. Please reproduce them without any changes

except under special instruction from Team International

BELGIUM. The page must reproduced and folded in order to

obtain a mini booklet B5 (+/- 150 mm width x 210 mm height).

The page must be folded in order to keep the good numbering

when you turn the page of the I/B . Don‟t change the page

numbering. Keep the languages integrity.

Assembly page 10/31

Fax +32 2 359 95 50



UK STYLE PLUG WIRING INSTRUCTIONS (IN THE UK ONLY)

This product must only be used from a 13 amp power socket. If a BS1363 approved 13 amp plug is

used, it should be fitted with a 13 amp fuse. The wires on the power cord are colour coded:

blue = neutral, brown = live, green or green & yellow = earth.

The blue wire must be connected to the terminal marked N or coloured in black.

The brown wire must be connected to the terminal marked L or coloured in red.

The green (& yellow) wire must be connected to the terminal marked E or coloured in green (& yellow).

ASSEMBLING THE VACUUM CLEANER

 Always remove the plug from the power socket before fitting or removing accessories.

 Fitting the tube: insert the tube into the air intake duct on the top of the appliance and press until

it clicks into position.

 Removing the tube: remove the plug from the power socket. To release the tube, press the button

on the end of the tube and pull the tube firmly from the air intake duct.

 Fit the telescopic tube both to the handle and the floor brush.

 Removing telescopic tube and accessories: to remove the accessories, pull firmly apart.

OPERATION

 Pull out a sufficient of length of power cord and insert the plug into the power socket. A yellow

mark on the power cable shows the ideal cable length. Do not extend the cable beyond the red

mark.

 Press on the ON/OFF switch to switch the appliance on and off.

 To rewind the power cable, press the rewind button with one hand, and guide the cable with

the other hand to ensure that it does not whip causing damage.

 It is advisable to set the electronic power regulator to MIN before switching the appliance on.

USING THE CLEANING ACCESSORIES

 The large brush is intended for cleaning of floor coverings and hard floors.

 When used for the suction of bare floor surfaces, pull out the brush. This can be done by pushing

the switch at the left-hand side of the brush forwards. When pushing the other switch, the brush

is ready for cleaning floor coverings.

A. Lever for cleaning hard floors.

B. Lever for cleaning carpets.

 The foot switching is easy and quick.

 Furniture brush is intended to clean curtains, shelves, books, inlaid furniture, lamps and other

delicate objects.

WHEN CLEANING IS FINISHED

 Stop the vacuum cleaner by depressing on the switch button.

 Disconnect plug from electrical outlet.

 Simply press lightly with your foot on cable rewind button on top of cleaner.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Team ST 27EC Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info