Bedienungsanleitung Team ST 49 (Seite 10 von 20) (Deutsch, Englisch, Holländisch, Französisch)

487585

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced and

folded in order to obtain a booklet A5 (+/- 148.5 mm width x

210 mm height). When folding, make sure you keep the good

numbering when you turn the pages of the I/B. Don’t change

the page numbering. Keep the language integrity.

10 TEAM ST 49 T - 101202

Assembly page 10/20

Fax +32 2 359 95 50

CLEANING THE FILTERS

Filters

The filter system consists of: 1 cyclone filter to vacuum the smallest particles (in the dust

container)

2 motor filters (on top of the dust collector)

1 air filter, to vacuum the smallest particles (at the back of the

appliance)

It is necessary to clean the 3 last filters regularly to avoid operating problems.

Motor filter

To clean the motor filters (filters situated under the lid of the dust collector), switch off the

appliance, take out the dust collector and turn its lid anticlockwise to take it off. Take the

bracket with the white filter and also remove the black filter to wash them both in soapsuds

(approximately every 3 months). Rinse the filters and let them dry. When the filters are

completely dry, put them back in the appliance. To do so, put the black filter and the bracket

with the white filter back in place correctly. Then put the lid back on, making sure that the lugs

of the lid fit into the slots of the dust collector, and turn the lid clockwise gently to lock it in

place. Make sure that the handle is aligned with the decorative part of the dust collector.

Air filter

 This air filter (situated behind the grid at the back of the appliance) guarantees fresh air

during cleaning. It should be replaced approximately every 3 months (depending on the

operating frequency).

 Switch off the appliance, open the grid, remove the filter and clean it in soapsuds. When it

is dry, put it back and close back the grid.

NOTE: After a certain number of cleanings the filters will be damaged or impossible to get back

in their initial shape. In such case, please contact the nearest customer service to obtain new

filters.

Cleaning the dust collector

 Press the release button of the dust container and pull the dust container out.

 Turn the lid of the dust collector anticlockwise to take it off and remove the motor filters.

 Put your fingers into the two half circles indicated by an arrow and turn anticlockwise

gently. Then pull to take the cyclone filter out.

 You can unscrew the plastic bottom part to rinse it with water. Screw it back on after

cleaning.

 Clean the inside of the dust collector, the lid and the cyclone filter with a damp cloth or

sponge, but make sure they are totally dry before using the appliance again.

 When the dust collector and its lid are completely dry, put the cyclone filter back into the

dust collector and turn the cyclone filter clockwise gently to lock it in place, making sure

that the “triangle” of the filter is right next to the opening of the dust collector. Put the

motor filters back in place and put the lid back on the dust collector in a correct way. Put

the dust collector back in the appliance until it clicks into place.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Team ST 49 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info