Bedienungsanleitung Team wk 21 (Seite 6 von 24) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

376066

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don’t change the page numbering. Keep the

language integrity.

6 TEAM WK 21 - 070212

Assembly page 6/24

Fax +32 2 359 95 50

BEFORE THE FIRST OPERATION

For the perfect taste, operate the jug kettle with fresh water in order to clean any residue left

from the manufacturing process. When the appliance has cooled down, repeat the process 3

times with fresh water, before rinsing.

OPERATION

 Always remove the jug from the power base before filling it.

 Raise the lid and fill the tank with fresh water paying attention not to fill under the "MIN"

mark and above the "MAX" mark in the kettle. You can see the level thanks to the

transparent water level indicator.

 Close the lid by pressing it down until it you hear a click. Make sure it closes correctly.

 Put the jug onto the power base, plug into the wall socket and switch on. The pilot light on

the handle will come on. If it does not come on, check if the jug kettle is placed correctly on

its base. If the problem persists, contact the nearest customer service.

 The jug kettle will switch off automatically when the water is boiling. However, you can

switch it off anytime by pressing the on/off switch.

 For instant reboiling, wait until water has cooled down and switch on the appliance again.

SAFETY CUT-OUT

 This jug kettle is protected with an automatic safety device if accidentally switched on

without water.

 In this case, switch off the appliance and wait about 10 minutes for the element to cool.

Then fill the jug kettle with cold water. This will reset the safety device.

 The kettle may then be used as normal.

 Should the problem persist, please contact the nearest customer service.

CLEANING AND MAINTENANCE

 Before attempting any cleaning operation, make sure the appliance is unplugged from

the supply socket and fully cooled down.

 To clean the exterior surfaces, simply wipe over with a soft damp cloth and dry thoroughly.

To remove scale from the inner walls of the kettle and from the filter you can use a soft

brush.

 Never use abrasive products

 On no account must the jug kettle or its power base be immersed in water.

DESCALING

To remove scale from the jug kettle, use products made especially available for this purpose.

Make sure to use a type recommended for plastic kettles and follow the product's instruction

manual carefully.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Team wk 21 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info