636542
38
Zoom out
Zoom in
Vorherige Seite
1/46
Nächste Seite
38
SECTION 17: TROUBLE SHOOTING
To save the time and expense of an unnecessary service call, perform the simple checks in this section before contacting a service
professional.
Your phone cannot be switched ON
Be sure that you press and hold the power button for more than 1 second.
Be sure that the battery is well connected to your phone. Remove the battery, reinstall the battery, and restart your phone.
If power is exhausted, recharge the battery.
Your phone cannot be switched ON, when switching ON your phone, the following messages may appear
Enter the phone lock code. The automatic lock function has been enabled. You must enter the phone lock code before you
can use the phone.
Enter the PIN code. The PIN check feature is enabled. Every time the phone is switched ON, the PIN has to be entered; (If you
are using your phone for the rst time, you must enter the PIN code supplied with the USIM card).
Enter the PUK code. The PIN code has been entered incorrectly three times, and the SIM card is now blocked. Enter the PUK
supplied by your network service provider.
USIM card error
USIM card is contaminated. Clear the metal contact on the USIM card with a clean cloth.
USIM card is not placed properly. Install the USIM card according to the user’s guide.
USIM card is damaged. Contact your network service provider.
Network failure
You may be in a weak signal area. Move to a dierent location with a stronger signal strength.
You are out of network service coverage.
USIM card is invalid. Contact your network service provider.
You have entered a number but it was not dialled
Make sure that you have pressed the dial button.
Make sure your USIM card is valid.
Make sure that you have not set outgoing call barring.
Make sure that you have not set xed dialling.
The quality of your call is poor
Check/adjust the volume.
You are in a weak signal area, such as nearing tall building or in the basement where radio cannot be eciently transferred.
You are using your phone during a busy period, such as commuting period when the lines are too busy to put through.
38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tecdesk Smart 5500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Tecdesk Smart 5500

Tecdesk Smart 5500 Bedienungsanleitung - Deutsch - 46 seiten

Tecdesk Smart 5500 Kurzanleitung - Englisch - 6 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info