Bedienungsanleitung Technaxx BT-X30 (Seite 7 von 12) (Deutsch, Englisch, Französisch)

795878

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Charging (charge the device before first use)

Plug charging cable into Micro USB charging connector of the car kit and USB slot of PC

or other USB slot of chargers to get charged. When the car kit is being charged, indicator

light turns RED. Once it is fully charged, indicator light turns OFF automatically. Apply the

same way to charge headphone. When the headphone is laid on car kit, plug charging

cable into Micro USB charging connector of the car kit and USB slot of PC or other USB

slot of chargers to get both car kit and headphone charged. Note: At the moment, although

RED LED indicator of headphone is off, it still charges headphone. You can also charge

the headphone separately! We recommend to fully charging the battery at least every 2–3

month, even if the device is not used.

Power on/off

Keep pressing power button until you hear a beep which indicates Bluetooth car kit and

headphone are turned on, meanwhile, the LED blinks BLUE and RED alternatively. To turn

off, press power button for 5 seconds until a beep will be heard.

Bluetooth Mode Connect the hands free system with a Smartphone

 For a successful Bluetooth connection between a mobile phone and the hands free

system, first make sure that your Smartphone is Bluetooth capable.  (second step) If yes,

you first have to activate the Bluetooth function on your mobile phone. Then switch ON the

hands free system. The LED (2) will now start to flash BLUE and RED alternatively. Your

device is now ready for connection.  Search with your mobile phone for Bluetooth

enabled devices. Then choose the device with the name “BT-X30” from the list. (When a

password is required then use the original password „0000“). Now the Bluetooth

connection will start.  After a successful connection, the LED flashes BLUE every 3

seconds. The hands free system now is in Standby mode.  In case the Bluetooth

connections fails, switch OFF the hands free system and try again from the second step.

 After successful Bluetooth pairing and with inserted headphone, music playback from

the Smartphone automatically runs via the loudspeaker of the car kit. The Smartphone

automatically switches to the Mute mode.

Note -> Pair with a second cell phone. Under standby mode, press power button for 3

seconds, when BLUE and RED LED blink alternatively, it enters pairing mode again. Turn

on Bluetooth of phone, search for BT-X30 and pair with the second phone. Then turn OFF

the BT-X30, cell phones Bluetooth disconnect as well. Later, turn on BT-X30 again, it pair

with two cell phones automatically.

Operate Bluetooth Hands-free

 Under Bluetooth mode, if there is an incoming call, you can pick up headphone to

answer privately or put headphone down and answer it by car kit. When the call ends,

press the hands-free button (7).  Under standby mode, double click “hands-free” to redial

the last outgoing phone call.  Under standby mode, single click at (7) Power

on/off/Hands-free/Pairing button to play the last played track. Click once when playing the

track will be paused.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Technaxx BT-X30 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info