9
Basic Operations
Slide switch explanation
First time start in Test mode select the device language. Not possible in ON
mode!
Switch the MODE button to “Test” to turn on the camera for settings.
Switch the MODE button to “ON” to turn the camera in recording mode.
Switch the MODE button to “Off” to turn off the camera.
System Setup
Switch MODE button to “Test”, then you can set the system parameters.
→ Press Up/Down button to switch between Video and Photo mode for manual
use in Test mode.
→→ Press Menu button to open the setup menu.
→→→ Press Up/Down button to scroll through all menus. Then press OK button
to enter the options interface.
→→→→ Press Up/Down button to scan all options. And press OK button to
confirm options.
→→→→→ Press MENU button again to turn back to last menu or exit the setup
menu.
Setup menu and function as below:
Mode: [Photo] / [Video] / [Photo & Video] (default). → Select and press OK button
to confirm.
Camera will take a photo first,
and then start to record video.
Photo Resolution: Set the image resolution: the bigger the resolution → the
higher the sharpness! (It will take more space either.)
[20MP: 5200x3900 (interpoliert)] / [16MP: 4608x3456 (interpoliert)] / [12MP:
4000x3000 (interpoliert)] / [8M: 3264x2448] (default) / [5M: 2592x1944] / [3M:
2048x1536] / [1M: 1280x960]
→ Select and press OK button to confirm.
