Bedienungsanleitung Technics SC-CH515 (Seite 39 von 60) (Englisch)

637111

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

You can use normal, chrome and metal tapes for recording.

The recording level and the noise reduction effect of the original

(playback) tape will be recorded on the new tape just as they were in

the original recording. 1 3

='1

II,- I d

2 546

I "".,

O1-DECK-20

• ___--_---_-_Z_ T-

Press INT on the tuner/sound processor to select "TAPE".

[] I

Check that the tape's erasure prevention tabs (see page 57) are

intact, and then insert the cassette into deck 2.

The leader tape must be wound on beforehand. (See page 31 .)

1 _ _ Load cassettes.

For playback: Into deck 1

For recording: Into deck 2

Insert both cassettes with the starting

side facing in front.

2 (_ Press CLOSE to close eachdeck's cassette holder,

ONETOUCH TAPE EDIT

NORMAL HIGH

Press one of ONE TOUCH

TAPE EDIT (NORMAL or HIGH)

to start recording with the de-

sired editing speed.

NORMAL: When you wish to monitor

the sound while recording

HIGH: When you wish to record at

high speed (about 2 times

normal speed)

While recording, both DECK 1 and DECK

2 indicators light. Tape direction indicator

shows the tape direction of deck 2.

After recording has finished, both decks

will stop.

REVERSEMODE Select the desired reverse

_ mode.

: Single-sided recording

C-?,__:Two-sided recording

(forward side--)reverse side)

In case the tape length loaded in

deck 2 is longer than a tape in

deck 1, deck 1 repeats the play-

back until deck 2 completes the

two-sided recording.

(8 times max.)

C_._L_,,_:Two-sided recording

(forward s ide--*reverse side)

-', Press CCRT to activate the

c_c CCRT function.

(See page 31 .)

You can record without using the CCRT

function.

Jr_t';/FJ_

[]

Set the tape direction to "D"

on deck 1 and deck 2.

Press DECK 1/2 and confirm both deck's

tape direction are "1>".

To change the tape direction, first press

I>, and then [;3.

To record on the reverse side, set deck 2

to "<3" tape direction. (In this case, be

sure to rewind the tape to the beginning

of the reverse side.)

[] I To stop recording:

Press El.

f_._ Both decks will stop.

To record on the reverse side of the tape:

Set the deck 2 tape direction to <3, and then press NORMAL or

HIGH.

To enjoy another source while recording:

Press D on the compact disc changer or TUNER/BAND on the

tuner/sound processor, and start the sound source.

You can change the volume level and tone quality without affecting

the recording.

For your reference:

For optimum results, use an editing tape of the same or higher

quality than the playback tape.

• Some TV sets generate noise that could be recorded during tape-

to-tape recording. To prevent the possibility of this, do not use this

system close to a TV set.

eDo not press CD edit recording buttons (J.F[T, ALBUM, LAST

FADE) while tape-to-tape recording is in progress. It changes the

tape-to-tape recording to the CD edit recording mode.

eYou cannot expect special tone quality and equalization effects for

tape-to-tape recording.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Technics SC-CH515 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info