Bedienungsanleitung Technics SC-DV290 (Seite 14 von 52) (Englisch)

537378

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

RQT6894

Basic operations

Discs

[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]

Preparation

pPress [¦/I] to turn on the unit.

pTurn on the television and select the appropriate video input on the televi-

sion to suit the connections for the unit.

1 Press [DVD] to select “DVD” as the source.

If the disc contains both audio data (WMA and MP3) and JPEG,

check “Mixed Disc—Audio & Stills” setting in the SETUP menu

(➡ page 46). Select “Audio (MP3/WMA)” or “Stills (JPEG)” .

2 Press DIRECT OPEN [DISC 1]–[DISC 5] to open a

tray and set a disc.

p[RAM] Remove TYPE 2 and 4 discs from their cartridges before use.

[A]

pLabel-up (With double-sided discs, load so the label for the side you

want to play is facing up.) [B]

3 Press [, OPEN/CLOSE] to close the tray.

The tray closed is in the play position (its disc indicator turns green).

Some discs start playing automatically.

Repeat steps 2 and 3 to load the other trays.

4 Press [DISC, 1–5] to change the play position

tray and start play.

[CD] (CD text only) [WMA] [MP3]

Track information appears on the television. Press [SHIFT]K

[SUBTITLE] to turn the display on or off.

5 Adjust the volume.

Play position

The disc in the play position is ready to play immediately when you press

[].

To pause play

Press [] during play.

Press [] to restart play.

To stop play

Press [w].

“RESUME” lights on the display when the unit has recorded the position at

which you stopped play.

Press [] to start play from that position.

[DVD-V]: Press [] again to review chapters (➡ page 16).

pPress [w] to clear the position.

pThe position is cleared when you turn the unit off, change the source,

open the disc tray or change the disc.

Note

pIf “” appears on the television

The operation is prohibited by the unit or disc.

pIt may take some time for play to start but this is normal.

When a menu appears on the television

[DVD-A] [DVD-V] [VCD]

Remote control only

Press the numbered buttons to select an item.

To select a 2-digit number

Example: To select item 23, press [510/-/--] ➡ [2] ➡ [3].

pWhen playing DVDs, you can also use [, , , ] to select items.

Press [ENTER] to confirm your selection.

To return to the menu screen

[DVD-A] [DVD-V] [TOP MENU]: Shows the first menu screen.

[DVD-V] [MENU]: Shows the menu screen.

[VCD] [RETURN]: Shows the menu screen.

Note

The disc continues to rotate while the menu is displayed even after you

finish playing an item. Press [w] when you finish to preserve the unit’s motor

and your television screen.

CANCEL

PLAY MODE

MIX 2CH

AUDIO

TAPE/

DECK 1/ 2

DVD

TUNER/

BAND

SLEEP

TOP MENU MENU

PLAY LIST

SUPER

SOUND EQ

SUBTITLE

POSITION MEMORY

SETUP

GROUP

DISC

890

CH SELECT

TEST

SUPER SRND

10/-/--

VCR(EXT)/

VDP(AUX)

MUTING

SLOW/SEARCH

DIGITAL

S.WOOFER

SKIP

VOLUME

ENTER

SHIFT

S. 3D AI EQ

DISPLAY

DIRECT

NAVIGATOR

AV EFFECT

RETURN

PRO LOGIC

RETURN

TOP MENU

, , ,

ENTER

SUBTITLE

Numbered

buttons

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Technics SC-DV290 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info