Bedienungsanleitung Technics SCC500EB (Seite 42 von 52) (Englisch)

612789

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Troubleshooting

The PC does not recognise this unit.

• Check your operating environment. ( 31)

• Restart the PC, turn this unit to standby and

on, and then reconnect the USB cable.

• Use another USB port of the connected PC.

• Install the dedicated driver if using a PC with

Windows.

Cannot find music files stored on the PC.

• When you play back music files over a network,

those that are not registered to its network

server are not displayed. For details, refer to

the operating instructions for your server.

Network

Cannot connect to the network.

• Confirm the network connection and settings.

( 18)

• If the network is set to be invisible, make the

network visible while you set up the network

for this unit or make a wired LAN connection.

• This system’s Wi-Fi security supports WPA2™.

Your wireless router must therefore be

WPA2™ compatible. For details on the security

supported by your router and how to change

the settings, please refer to the operating

instructions or contact your internet service

provider.

• Make sure that the multicast function on the

wireless router is enabled.

• Depending on the router, WPS button may not

work. Try other methods. ( 18)

• Check the Wi-Fi signal strength using “Signal

Level” and adjust location of this unit and the

wireless router. ( 37)

Cannot select this system as the output

speakers.

• Make sure that the devices are connected to

the same network as this system.

• Reconnect the devices to the network.

• Turn the wireless router off and then on.

• Turn this unit to standby and on, and then

select this system as the output speakers again.

Playback does not start.

The sound is interrupted.

• Try to place the speakers further away from

this unit.

• If using the 2.4 GHz band on the wireless

router, simultaneous use with other 2.4

GHz devices, such as microwaves, cordless

telephones, etc., may result in connection

interruptions. Increase the distance between

this unit and these devices.

- If your wireless router supports 5 GHz band,

try using the 5 GHz band.

To change to the 5 GHz band, redo the

network settings using an internet browser

( 22). On the step 5, make sure to select

your network name (SSID) for the 5 GHz

band.

• Do not place this system inside a metal cabinet,

for it might block the Wi-Fi signal.

• If the playback stops, check the playback status

on the device.

• Place this system closer to the wireless router.

• If several wireless devices are simultaneously

using the same wireless network as this unit,

try turning off the other devices or reducing

their wireless network usage.

• Reconnect the devices to the network.

• Turn the wireless router off and then on.

• With some iOS and iTunes versions, it may

not be possible to restart the AirPlay playback

if the selector is changed (e.g. “CD”) or this

unit is in standby mode, during the AirPlay

playback. In this case, select a different device

from the AirPlay icon of the Music App or

iTunes and then re-select this system as the

output speakers. (

34)

• Try a wired LAN connection. ( 18)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Technics SCC500EB Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Technics SCC500EB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info