Bedienungsanleitung Technics SCEN26 (Seite 4 von 8) (Englisch)

612809

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

SLEEP

CLOCK/

TIMER ADJ

DISPLAY

TIMER

SET/CHECK

PGM/CLEAR

AUTO PRESET

OPEN/

123

MUSIC PORT

TUNER/

BAND

SOUND

LIVE

VIRTUALIZER

PLAY

MODE

ALBUM

VOL

SC-EN25/SC-EN26SC-EN27

PRESET TUNE

ALBUM

TUNER/

BAND

TUNER/

BAND

TUNER/

BAND

123

Within 10 seconds

PGM

SC-EN25/SC-EN26SC-EN27

MONO

Radio operations

Radio stations can be tuned manually by selecting the station’s frequency or they can be preset into channels to make it easy to tune.

You can preset up to 20 FM channels and up to 12 AM channels.

To adjust the volume

(Minimum)

(Maximum)

Input using the numbered

buttons

To select a 2-digit number

e.g. 11: [ 10] → [1] → [1]

To adjust the volume

Allocation settings

Each country allocates broadcast bands according to their particular system.

You can change the FM step. The step is factory-set to 0.2 MHz, but you

can change it to receive broadcasts allocated 0.1-MHz steps.

Any FM frequencies preset in channels will be changed by this procedure.

Preset them again.

1. Select the AM band with [TUNER/BAND].

2. Press and hold [TUNER/BAND] on the unit.

After a few seconds the display changes to show the current minimum

frequency. Continue to hold the button down. The minimum frequency

changes and the step is changed.

To return to the original step, repeat the above steps.

Note

The preset memory will be initialized when you change the frequency step.

To improve reception

FM AM

Receive the radio stations after

connecting the antenna. Then

attach the antenna code on the wall

or pillar in the good reception.

Change the direction and location

of the antenna.

If noise is excessive in FM

You can improve FM reception by switching reception to monaural.

Press to turn the MONO

mode ON/OFF

Manual

tuning

Main unit

Remote control

Select “FM” or “AM”

Select the frequency

Select “FM” or “AM”

Select the frequency

Automatic

presetting

The tuner

presets the

stations it can

receive into

channels in

ascending order.

Auto

tuning

Manual

presetting

Preset the

stations one at a

time.

Selecting

channels

Main unit

Remote control

Select “FM” or “AM”

Press and hold until the

frequency starts changing

rapidly

Select “FM” or “AM”

Press and hold until the

frequency starts changing

rapidly

• Auto tuning stops when it ﬁ nds a station.

• To cancel auto tuning press the same button again.

• Auto tuning may not function when there is

excessive interference.

Note

Perform once for FM stations and once for AM stations.

Select “FM” or “AM”

Press and hold until

“AUTO” appears

During automatic presetting, the memory indicator

(

PGM

) ﬂ ashes and the frequency scrolls. The memory

indicator and channel numbers are displayed for a

second when a station is preset.

The ﬁ rst station to be preset is displayed when

presetting ﬁ nishes.

Note

Tune to the

signal you

want to

set as the

preset.

Enter preset mode

Select a channel

The station occupying a channel is erased if another

station is preset over that channel.

Note

Select “FM” or “AM” Select a channel

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Technics SCEN26 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Technics SCEN26

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info