Bedienungsanleitung Technics SCEN37 (Seite 6 von 8) (Englisch)

608360

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

g AMPLIFIER SECTION

RMS OUTPUT POWER both channel driven

simultaneously

10 % total harmonic distortion (THD)

1 kHz 3.0 W per channel

Output impedance

HEADPHONE 16 Ω to 32 Ω

MUSIC PORT 14 kΩ

DC IN Jack

Terminal DC 14 V

Phone Jack

Terminal 3.5 mm stereo

Music Port Jack

Terminal 3.5 mm stereo

Option Port Version 1

g TUNER SECTION

Frequency range

FM 87.50 MHz to 108.00 MHz (50 kHz)

AM 522 kHz to 1629 kHz (9 kHz)

520 kHz to 1630 kHz (10 kHz)

g CD SECTION

Disc played [8 cm or 12 cm]

(1) CD-Audio (CD-DA)

(2) CD-R/RW (CD-DA, MP3)

(3) MP3

Sampling frequency

CD 44.1 kHz

MP3 32 kHz, 44.1 kHz, 48 kHz

Bit rate

MP3 32 kbps to 384 kbps

Decoding 16/20/24 bit linear

Pick up

Wavelength 785 nm

Laser power CLASS 1

(For Norge)

Bølgelengde 785 nm

Laserstyrke Ingen farlig stråling sendes ut

(med sikkerhets-beskyttelse)

Audio Output (Disc)

Number of channels 2 channel

Frequency response 20 Hz to 20 kHz (+1, -2 dB)

Wow and ﬂutter

Below measurement limit

Digital ﬁlter 8

D/A converter MASH (1 bit DAC)

g SPEAKER SECTION

Type 1 Way, 1 Speaker system

Speaker Unit(s)

Full Range Speaker 8 cm cone type 6 Ω

Impedance 6 Ω

Input power 6 W (MAX)

Dimensions (W x H x D)

121 mm x 236 mm x 146 mm

g GENERAL

Power supply AC 230 to 240 V, 50 Hz

Power consumption 32 W

Dimensions (W x H x D)

220 mm x 236 mm x 146 mm

Mass

With speakers 3.57 kg

Without speakers 1.27 kg

Operating temperature range +5 °C to +35 °C

Operating humidity range

% to 90 % RH (no condensation)

Power consumption in standby mode:2.0 W (approx.)

Notes:

Speciﬁcations are subject to change without notice.

Mass and dimensions are approximate.

Speciﬁcations

6 7

Sleep timer

The SLEEP timer can turn the unit off after a set time.

Press [SLEEP] to turn the SLEEP function ON/OFF.

Each time you press the button:

30 MIN 60 MIN 90 MIN 120 MIN

OFF (Canceled)

g To check the remaining time

Press [SLEEP] once

The play timer and sleep timer can be used together. The sleep timer always has

priority. Be sure not to overlap timer settings.

•

Sound quality

You can choose one of four types of sound quality.

Press [PRESET EQ] to select the sound quality.

Each time you press the button:

HEAVY CLEAR SOFT

(Adds punch to rock) (Clariﬁes higher sounds) (For background music)

EQ OFF (Canceled) VOCAL (Adds gloss to vocals)

•

Live Virtualizer

You can create a three-dimensional sound ﬁeld when listening to stereo sound.

Press [SURROUND] to turn the Live Virtualizer ON/OFF.

The actual effect depends on the source played.

Play timer

You can set the timer to come on at a certain time to wake you up.

Preparation:

Turn the unit on and set the clock.

Prepare the music source you want to listen to; disc, radio, OPTION or music port

source, and set the volume.

 Press [CLOCK/TIMER] repeatedly to select play timer.

CLOCK zPLAY Original display

 Within 5 seconds, press [2/u] or [1/i] to set the starting time.

 Press [CLOCK/TIMER] to conﬁrm.

 Repeat steps 2 and 3 to set the ﬁnishing time.

To activate the timer

 Press [zPLAY] to turn on the timer.

 Press [^] to turn off the unit.

To Action

Change the settings Repeat steps 1 to 4 and 6.

Change the source of volume

 Press [zPLAY] to clear zPLAY indicator

from the display.

 Make changes to the source or volume.

 Perform steps 5 and 6.

Check the settings (when the

unit is on or in standby mode)

Press [CLOCK/TIMER] repeatedly to select

zPLAY.

Cancel

Press [zPLAY] to clear the timer

indicator from the display.

The timer will start at the preset time, with the volume increasing gradually to the

preset level.

The timer comes on at the set time every day if the timer is on.

The unit must be in the standby mode for the timer to function.

If you turn the unit off and on again while the timer is functioning, the ﬁnish time

setting will not be activated.

When MUSIC PORT or OPTION port is selected as the source when the timer

comes on, the system turns on and engages MUSIC PORT or OPTION port as

the source. If you wish to playback from the portable audio equipment, activate

the equipment’s play mode and increase the volume. (See the portable audio

equipment’s instruction manual.)

•

Timers and others

➡

Page 2 for the position of remote control buttons.

Note

Setting the time

This is a 24-hour clock.

 Press [CLOCK/TIMER] to set the clock.

 Press [2/u] or [1/i] to select the time within 5 seconds.

(Press and hold to change the time faster.)

 Press [CLOCK/TIMER] again.

g To display the clock when the unit is on

Press [CLOCK/TIMER]

g To check the time when the unit is off

Press [CLOCK/TIMER]

The clock is accurate to within ±60 seconds a month. Readjust if necessary.

Set again after disconnecting the AC mains lead or power failure.

Note

To clean this unit, wipe with a soft, dry cloth.

Never use alcohol, paint thinner or benzine to clean this unit.

Before using chemically treated cloth, read the instructions that came with the cloth

carefully.

•

Clean the lens regularly to prevent malfunctions. Use a blower to remove dust and a

cotton swab if it is extremely dirty.

Recommended product: Lens cleaner kit (part no. SZZP1038C).

Do not use the lens cleaner of the CD type.

•

Care of the CD lens

Maintenance

If the surfaces are dirty

SC-EN35 E,GN,GCS PP.indd 6 22/03/2007 15:51:21

Technics SCEN37 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Technics SCEN37

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info