Bedienungsanleitung Technics SE-R1 (Seite 5 von 116) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Finnisch)

618702

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

English

Safety precautions

Unit

≥ To reduce the risk of fire, electric shock or product damage,

– Do not expose this unit to rain, moisture, dripping or splashing.

– Do not place objects filled with liquids, such as vases, on this unit.

– Use only the recommended accessories.

– Do not remove covers.

– Do not repair this unit by yourself. Refer servicing to qualified service personnel.

– Do not let metal objects fall inside this unit.

– Do not place heavy items on this unit.

AC mains lead

≥ To reduce the risk of fire, electric shock or product damage,

– Ensure that the power supply voltage corresponds to the voltage printed

on this unit.

– Insert the mains plug fully into the socket outlet.

– Do not pull, bend, or place heavy items on the lead.

– Do not handle the plug with wet hands.

– Hold onto the mains plug body when disconnecting the plug.

– Do not use a damaged mains plug or socket outlet.

≥ The mains plug is the disconnecting device.

Install this unit so that the mains plug can be unplugged from the socket

outlet immediately.

Unit

≥ Do not place sources of naked flames, such as lighted candles, on this unit.

≥ This unit may receive radio interference caused by mobile telephones

during use. If such interference occurs, please increase separation between

this unit and the mobile telephone.

≥ This unit is intended for use in tropical climates.

≥ Do not put any objects on this unit. This unit becomes hot while it is on.

Placement

≥ Place this unit on an even surface.

≥ To reduce the risk of fire, electric shock or

product damage,

– Do not install or place this unit in a bookcase,

built-in cabinet or in another confined space.

Ensure this unit is well ventilated.

– Do not obstruct this unit’s ventilation openings

with newspapers, tablecloths, curtains, and

similar items.

– Do not expose this unit to direct sunlight, high

temperatures, high humidity, and excessive

vibration.

≥ More than one person is required to move or

carry the unit.

≥

Ensure that the placement location is sturdy enough

to accommodate the weight of this unit (

15).

≥ Do not lift or carry this unit by holding any of its knobs. Doing so may cause

this unit to fall, resulting in personal injury or malfunction of this unit.

NORSK

Produkt

≥ For å redusere faren for brann, elektrisk støt eller skade på apparatet:

– Utsett ikke produktet for regn, fukt, drypping eller sprut.

– Ikke plasser objekter som er fylt med væske, som vaser, på apparatet.

– Bruk kun anbefalt tilbehør.

– Fjern ikke deksler.

– Reparer ikke denne enheten selv, overlat service til kvalifisert

servicepersonell.

Vekselstrømnett

≥ Nettstøpselet er trukket ut fra denne enheten.

Installer denne enheten slik at nettstøpselet umiddelbart kan trekkes fra

stikkontakten.

Produkt

≥ Plasser ikke åpen ild, slik som levende lys, oppå apparatet.

≥ Denne enheten er beregnet for bruk i tropiske klimaer.

Plassering

≥ For å redusere faren for brann, elektrisk støt eller skade på apparatet:

– Ikke plasser apparatet i en bokhylle, et innebygget kabinett eller et annet

lukket sted. Pass på at produktet er godt ventilert.

– Apparatets ventilasjonsåpninger må ikke dekkes til med aviser, duker,

gardiner eller lignende.

(For the AC mains plug of three pins)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains plug for your safety

and convenience.

A 10-ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure that the replacement fuse

has a rating of 10-ampere and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it is refitted

when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a replacement cover

is obtained.

A replacement fuse cover can be purchased from your local dealer.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC mains plug (figures A

and B). Confirm the AC mains plug fitted and follow the instructions below.

Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

2. Replace the fuse and close or attach the fuse cover.

WARNING

CAUTION

ADVARSEL

FORSIKTIG

Caution for AC Mains Lead

Disposal of Old Equipment

Only for European Union and countries with recycling

systems

This symbol on the products, packaging, and/or

accompanying documents means that used

electrical and electronic products must not be

mixed with general household waste.

For proper treatment, recovery and recycling of

old products, please take them to applicable

collection points in accordance with your national

legislation.

By disposing of them correctly, you will help to

save valuable resources and prevent any

potential negative effects on human health and

the environment.

For more information about collection and

recycling, please contact your local municipality.

Penalties may be applicable for incorrect disposal

of this waste, in accordance with national

legislation.

Figure A Figure B

Fuse cover

Figure A Figure B

Fuse

(10 ampere)

Fuse

(10 ampere)

(5)

SE-R1-SQT0461_EBEG_mst.book 5 ページ２０１５年１月２３日　金曜日　午後４時４０分

Technics SE-R1 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Technics SE-R1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info