536119
7
Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
RQT7020
7
Connections and installation
Connecting to an Audio Mixer (not
included)
Disconnect all units from the power source before making any con-
nections.
Reconnect the AC mains leads after all other connections are com-
plete.
Installation
Install the unit on a horizontal surface protected from vibrations.
Keep this unit as far as possible from speakers.
Ensure the unit is not exposed to direct sunlight, dust, humidity,
and heat from a heating appliance.
This unit may pick up interference from a radio if there is one nearby.
Keep radios as far as possible from this unit.
Adjusting the height of the insulators
Place the unit where it is to be used and adjust the height of the legs
to make the unit horizontal.
Preparatory adjustments
Horizontal balance and stylus pressure
1 Release the tone arm.
1. Remove the stylus cover, taking care not to dam-
age the stylus, then release the arm clamp.
2. Free the tone arm from the arm rest.
For your reference
Use the stylus weight (included)
to increase stylus pressure by 4
grams.
4 Adjust stylus pressure
Turn the balance weight to adjust to the appropri-
ate pressure for the cartridge you are using.
See the cartridges instructions for recommended stylus pres-
sure.
The stylus pressure control will turn at the same time. Stop
when the center line points to the required pressure.
3 Turn the stylus pressure control to 0
1. Return the tone arm to the arm rest and fix it
with the arm clamp.
2. Turn the stylus pressure control to 0.
Hold the balance weight still while doing this.
Unit
Earth lead
Audio mixer
Turn
balance
weight
Center line
Balance weight
Center line
Turn stylus
pressure
control
Arm clamp
Head shell
Stylus weight
Arm clamp
Unit
2 Adjust horizontal balance
1. Push the cue lever down.
2. Turn the anti-skating control to 0.
3. Turn the balance weight until the arm is approxi-
mately horizontal.
Take care at this time not to allow the stylus to touch the unit.
Arm clamp
Arm rest
Cue lever
Anti-skating control
Balanced
Too far forward
Too far back
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Technics SL-1200GLD wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Technics SL-1200GLD

Technics SL-1200GLD Kurzanleitung - Deutsch - 2 seiten

Technics SL-1200GLD Bedienungsanleitung - Deutsch - 76 seiten

Technics SL-1200GLD Kurzanleitung - Englisch - 2 seiten

Technics SL-1200GLD Bedienungsanleitung - Englisch - 12 seiten

Technics SL-1200GLD Kurzanleitung - Holländisch - 2 seiten

Technics SL-1200GLD Bedienungsanleitung - Holländisch - 76 seiten

Technics SL-1200GLD Kurzanleitung - Dänisch, Französisch - 2 seiten

Technics SL-1200GLD Bedienungsanleitung - Französisch - 76 seiten

Technics SL-1200GLD Kurzanleitung - Italienisch - 2 seiten

Technics SL-1200GLD Bedienungsanleitung - Italienisch - 76 seiten

Technics SL-1200GLD Kurzanleitung - Spanisch, Polnisch, Schwedisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info