Bedienungsanleitung Technics SL-DZ1200 (Seite 16 von 28) (Englisch)

536137

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

RQT7114

Advanced operations

Locking the pitch

You can change the tempo without affecting the pitch.

Press [PITCH LOCK]

•The PITCH LOCK lamp lights.

•Sound quality will change due to digital processing.

•Making a big adjustment to the rate of change in tempo may

cause the occurrence of digital noise.

•By rotating the platter slip surface with the pitch lock set to on,

you can play using the platter slip surface without changing the

original pitch.

•Pitch lock automatically turns off when the power is turned off.

Reverse play (Reversing the platter)

You can reverse play a track.

Set the play direction switch to REVERSE side

•The platter spins in reverse, and reverse play starts.

•Reverse play is synchronized with the platter, therefore it may

take time for it to come up to the normal rated speed. Use In-

stant Change to make quicker changes.

•The direction you increase or decrease tempo with your hand

on the platter slip surface is also reversed.

•You cannot reverse play from the 1st track back to the last track.

•You cannot perform reverse play beyond a track with MP3 files on

CD-R and CD-RW.

•When using reverse play, the start of play for cue pad play or loop

play that is longer than 15 seconds may be delayed ( page 18).

Changing tempo and direction of play

Before use

•Switch [PLAY SELECT] to select the media to be used

•Turn [MODE] on the rear panel to TURNTABLE

•Insert the SD Memory Card or CD to be used

Changing tempo

1 When the RESET lamp is lit

Press [RESET] and the RESET lamp

goes out

2 Press [RANGE] to select the tempo

variation range

•Each time the button is pressed:

±8% ±16% ±33% ±50%

•When playing CD-R, CD-RW MP3 files or SD audio, only

the ±8%, ±16% range can be selected.

•The larger the range number, the larger the change in tempo

when using [TEMPO].

•The selected tempo variation range lamp lights.

3 During play, use [TEMPO] to make ad-

justments

•Use the scale on the panel for making approximate adjust-

ments.

•The pitch will change with the tempo.

•When the power is turned off the range returns to ±8%.

You can change the tempo and pitch of the media being played.

RESET lamp

Tempo reset

Press [RESET]

•The RESET lamp lights and play instantly returns to normal play

when playing.

•Tempo reset automatically turns off when the power is turned

off.

Checking tempo

•The change in tempo

rate appears in the dis-

play.

•You can check the relative change in tempo when the strobo

light reflects on the three rows of strobo dots on the peripheral

edge of the platter when rotating.

Strobo dots

When the dots appear to be stationary, the tempo setting

has changed about +3.5%.

When the dots appear to be stationary, the tempo is at

normal setting.

When the dots appear to be stationary, the tempo setting

has changed about –3.5%.

Note

The strobo dot illuminator is a synchronized and precise frequency

quartz illuminator (Red LED). Be sure to use this red LED as the basis

when checking tempo.

Change in

tempo rate

Strobo illuminator

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Technics SL-DZ1200 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Technics SL-DZ1200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info