Bedienungsanleitung Technics SL-DZ1200 (Seite 22 von 28) (Englisch)

536137

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

RQT7114

Other functions

001

001ABCDE.mp3

002FGHIJ.mp3

003KLMNO.mp3

004PQRST.mp3

002

001A_123.mp3

002FG_12.mp3

003KLM_1.mp3

003

001VWXYZ.mp3

1 Insert the SD Memory Card containing

saved data ( page 10)

Loading sample pad data

You can recall sample pad 1-4 data saved on a SD Memory Card.

2 Load the file

1. Press SD CARD [LOAD]

•The LOAD lamp lights. “SD LOAD” screen appears in the

display.

•The S.PADS lamp lights.

2. Press [– + BANK] to select the file

•Press and hold [– + BANK] to load in high speed.

•Display of the selected file is reversed.

(File example) 001ABCDE, 002FGHIJ...

•Press [LOAD] again to cancel.

3. Press [EXECUTE]

•The media begins to load, “NOW SD LOADING” appears

in the display. Loading may take up to 25 seconds.

•The LOAD lamp goes out once loading has finished and

“COMPLETED” appears in the display.

•Pressing [LOAD] during play, displays a warning message and play

continues.

•Previous sample pad data is erased from memory on this unit once

loaded.

Recalling (loading) data saved on a

SD Memory Card

Regarding MP3 albums and SD audio

Saving to a SD Memory Card, Recalling

Selection and play order of tracks within an MP3

album

•For MP3 tracks on CD-R and CD-RW, play proceeds folder by

folder in the sequence of folder number order.

•Only MP3 files are playable when there are files other than MP3

files on the CD-R, CD-RW containing the MP3 files.

However, when there is normal audio data (CD-DA) and MP3

files mixed on the same disc, only audio data can be played.

Folders that do not contain MP3 files are skipped.

Creating MP3 files for play on this unit

•The format used for CD-R, CD-RW is ISO9660 level 1, or level 2.

•When creating on a computer etc, give folders and files names

using numeric and alphabetic characters.

•Read the operating instruction manual if using MP3 file creation

software on your computer. Depending on the type of recording,

some MP3 files may not be playable.

•Only ID3 tag track titles are displayable on this unit.

V1, V1.1 (Up to 32 alphanumeric characters.)

•This unit is compatible with multi-sessions. When there are many

sessions, it may take some time for play to begin, therefore we

recommend reducing the number of sessions to a minimum.

•You cannot play a file that was recorded with packet write.

•This unit is not compatible with HighMAT

Creating SD audio for play on this unit

Record tracks to a SD Memory Card using only the “SD JUKE-

BOX” application for recording SD audio for your PC, and a USB

reader-writer (all sold separately).

•This unit is not compatible with the WMA format.

Play order

Folders can be created within folders, however

the play may not proceed in the correct order.

Root

track

1 Insert the SD Memory Card ( page 10)

All data is erased and the SD Memory Card is formatted. Useable

capacity will be less. Useable capacity may differ from that indicated

on the media.

Use only when you want to erase all files or when there is data

on the card that cannot be read.

Formatting the SD Memory Card

2 Hold down SD CARD [SAVE] for more

than 5 seconds until “FORMAT OK?”

appears in the display

•Press [SAVE] again to cancel.

3 Press [EXECUTE] to proceed

•“COMPLETED” will appear on the display. All data is erased

and the card is formatted.

•If “FORMAT ERROR” appears in the display, this SD Memory

Card cannot be formatted.

Panel data automatic loading (TURNTABLE mode only)

The unit automatically loads panel data for each CD or SD Memory

Card to its memory from the SD Memory Card.

1. Switch [PLAY SELECT] to select the media to be used

and turn the MODE switch on the rear panel to TURN-

TABLE side

2. Insert the SD Memory Card containing saved panel

data

3. If the media corresponding to the saved panel data is

a CD, insert the CD

•If the same media data exists on the SD Memory Card and in

the unit’s memory, the SD Memory Card takes precedence and

the unit’s memory is overwritten.

If you do not want to replace data in the unit’s memory, save to a

SD Memory Card in advance.

track

Naming folders and files

At the time of recording, give folders

and file names with 3-digit prefixes

in the order you want to play them.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Technics SL-DZ1200 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Technics SL-DZ1200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info