Bedienungsanleitung Technics SL1200MK5 (Seite 10 von 12) (Englisch)

474521

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

RQT7018

Head shell

terminals

Oil

Maintenance

Care of the parts

To clean this unit, wipe with a soft, dry cloth.

•Never use alcohol, paint thinner, or benzine to clean this unit.

•Before using chemically treated cloth, read the instructions that

came with the cloth carefully.

Do not wipe the dust cover while playing a record.

This can cause static electricity. This static can cause the tone arm

to be attracted towards the cover.

Thoroughly clean dust off the stylus and record.

•

Use a soft brush to clean the stylus. Brush from the base to the tip.

•Use a good quality record cleaner to keep your records clean.

Wipe the head shell terminals occasionally.

Use a soft cloth. Turn the amplifier off before fitting or removing the

head shell.

•Damage to your speakers can occur if the head shell is moved

while the volume is turned up.

•Leave the stylus cover on while handling the head shell to prevent

damaging the stylus.

Oiling the center spindle.

Apply 2 or 3 drops every 2000 hours of operation. Use SFW0010 oil

(not included).

Moving the unit

Repackage the unit in the packaging it came in.

If you no longer have the packaging, do the following:

•Return the tone arm to the arm rest and tape it in place.

•Remove the balance weight and head shell from the tone arm and

carefully wrap them.

•Take off the turntable and turntable mat and carefully wrap them.

•Carefully wrap the main unit in a blanket or paper.

Product service

1. Damage requiring service—The unit should be serviced by

qualified service personnel if:

(a) The AC power supply cord or AC adaptor has been

damaged; or

(b) Objects or liquids have gotten into the unit; or

(d) The unit does not operate normally or exhibits a marked

change in performance; or

(e) The unit has been dropped or the cabinet damaged.

2. Servicing—Do not attempt to service the unit beyond that

described in these operating instructions. Refer all other servic-

ing to authorized servicing personnel.

3. Replacement parts—When parts need replacing ensure the

servicer uses parts specified by the manufacturer or parts that

have the same characteristics as the original parts.

Unauthorized substitutes may result in fire, electric shock, or

other hazards.

4. Safety check—After repairs or service, ask the servicer to

perform safety checks to confirm that the unit is in proper

working condition.

Product information

For product information or assistance with product operation:

In the U.S.A., contact the Panasonic Customer Call Center at 1-

800-211-7262, or e-mail consumerproducts@panasonic.com, or the

website (http://www.panasonic.com).

In Canada, contact the Panasonic Canada Inc. Customer Care Cen-

tre at 905-624-5505, or visit the website (www.panasonic.ca), or an

authorized Servicentre closest to you.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Technics SL1200MK5 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Technics SL1200MK5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info