Bedienungsanleitung Technics ST-C700 (Seite 18 von 36) (Englisch)

622382

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Using Bluetooth

You can listen to the sound from the Bluetooth

audio device from this unit wirelessly.

≥ Refer to the operating instructions of the Bluetooth

device for details.

≥ If you intend to use an NFC (Near Field Communication)-compatible Bluetooth

device, proceed to “Connecting by NFC”.

Preparation

≥Turn on the Bluetooth

feature of the device and place the

device near this unit.

1 Press [NWP].

2 Press [N INPUT O] below [NWP] repeatedly

to select “Bluetooth”.

3 Press [MENU].

4 Press [3, 4] repeatedly to select “Pairing”

and then press [OK].

5 Press [3, 4] to select “Yes” and then press

[OK].

≥“Pairing” is indicated on the display.

6 Select “ST-C700” from the Bluetooth

device’s Bluetooth

menu.

≥The name of the connected device is indicated on the

display.



≥ If prompted for the passkey, input “0000”.

≥ You can register up to 8 devices with this unit. If a 9th device is

paired, the device that has not been used the longest will be

replaced.

For NFC-compatible Bluetooth

devices (Android™

devices with version 4.1 or later) only

With the touch of an NFC (Near Field Communication)-

compatible Bluetooth

device to this unit, you can complete a

series of steps from registering a Bluetooth

device to

connecting it to this unit.

Preparation

≥Turn on the NFC feature of the device.

1 Press [NWP].

2 Press [N INPUT O] below [NWP] repeatedly

to select “Bluetooth”.

3 Press [MENU].

4 Press [3, 4] repeatedly to select “NFC” and

then press [OK].

5 Press [3, 4] to select “Yes” and then press

[OK].

6 Touch and hold your device on the NFC

touch area of this unit within 20 seconds.

(> 7)

≥Do not move the Bluetooth

device until it displays a

message or reacts in some way.

Once the Bluetooth

device has reacted, move the

device away from this unit.

– When the connection of the Bluetooth

device is complete,

the name of the connected device is indicated on the

display.

– The location of the NFC touch area differs depending on the

device. When a connection cannot be established even if

your Bluetooth

device has touched the NFC touch area of

this unit, change the position of the device.



≥ If you connect another NFC-compatible Bluetooth

device, the

previously connected device will be disconnected automatically.

≥ When the connection is established, playback may start

automatically depending on the type of device being used.

≥ Connecting by NFC may not work properly depending on the type

of device being used.

≥ Do not make an NFC connection in any other way than instructed

in the Operating Instructions. Doing so may cause malfunction.

Connecting via Bluetooth

Connecting by NFC

ST-C700-SQT0492_EBGN_mst.book 18 ページ２０１５年６月１５日　月曜日　午前９時１６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Technics ST-C700 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Technics ST-C700

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info