Bedienungsanleitung Technics SUC550EB (Seite 42 von 52) (Englisch)

622404

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Troubleshooting

Bluetooth

Pairing cannot be completed.

• Check the Bluetooth

device condition.

The device cannot be connected.

• The pairing of the device was unsuccessful or

the registration has been replaced. Try re-

pairing the device. ( 28)

• This unit might be connected to a different

device. Disconnect the other device and try re-

pairing the device.

The device is connected, but audio cannot

be heard through this unit.

• For some built-in Bluetooth

devices, you have

to set the audio output to “SU-C550” manually.

Read the operating instructions for the device

for details.

The sound is interrupted.

• The device is out of the 10 m communication

range. Bring the Bluetooth

device closer to

this system.

• Remove any obstacle between this system and

the device.

• Other devices that use the 2.4 GHz frequency

band (wireless router, microwaves, cordless

phones, etc.) are interfering. Bring the

Bluetooth

device closer to this system and

distance it from the other devices.

• Select “Mode1” for stable communication.

( 29)

The PC does not recognise this unit.

• Check your operating environment. ( 31)

• Restart the PC, turn this unit to standby and

on, and then reconnect the USB cable.

• Use another USB port of the connected PC.

• Install the dedicated driver if using a PC with

Windows.

Cannot find music files stored on the PC.

• When you play back music files over a network,

those that are not registered to its network

server are not displayed. For details, refer to

the operating instructions for your server.

Network

Cannot connect to the network.

• Confirm the network connection and settings.

( 18)

• If the network is set to be invisible, make the

network visible while you set up the network

for this unit or make a wired LAN connection.

• This system’s Wi-Fi security supports WPA2™.

Your wireless router must therefore be

WPA2™ compatible. For details on the security

supported by your router and how to change

the settings, please refer to the operating

instructions or contact your internet service

provider.

• Make sure that the multicast function on the

wireless router is enabled.

• Depending on the router, WPS button may not

work. Try other methods. ( 18)

• The wireless LAN environment or radio

interference in your area may cause connection

problem. In this case, try another connection

method. If the problem persists, make a wired

LAN connection. ( 18)

• While the AC mains lead is disconnected, the

LAN cable must be connected or disconnected.

Cannot select this system as the output

speakers.

• Make sure that the devices are connected to

the same network as this system.

• Reconnect the devices to the network.

• Turn the wireless router off and then on.

• Turn this unit to standby and on, and then

select this system as the output speakers again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Technics SUC550EB Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Technics SUC550EB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info