Bedienungsanleitung Technics SUR1EB (Seite 23 von 240) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Finnisch)

622409

Zoom out

Zoom in

Vorherige Seite

1/240

Nächste Seite

English

You can automatically link this unit with the SE-R1 and

operate them easily with the remote control.

Preparation

1 Connect this unit and the SE-R1 with cables for system

control. (> 9)

2 Set the input selector knob on the SE-R1 to [DIGITAL].

3 Press the unit on/off button on this unit and the SE-R1 to

the [ ] position.

4 If “Digital Link” is set to “Off”, change the setting to “On”.

∫ Switching this unit and the SE-R1 to

on/standby simultaneously

≥If you point the remote control at this unit and press [Í]

when this unit and the SE-R1 are in standby mode, this unit

and the SE-R1 will be turned on simultaneously.

≥If you point the remote control at this unit and press [Í]

when this unit and the SE-R1 are turned on, this unit and

the SE-R1 will simultaneously enter standby mode.

∫ Measuring the characteristics of the

amplifier and correcting its output

You can operate using the remote control of this unit.

∫ Adjusting Bass/Middle/Treble

You can adjust the tone of the SE-R1 with this unit. Each

tonal range (Bass/Middle/Treble) can be adjusted.

1 Press [SETUP].

2 Press [3, 4] repeatedly to select “Tone Control” and

then press [OK].

3 Press [3, 4] to select “On (adjustment)” and then press

[OK].

4 Press [3, 4] to select “BASS” (Bass), “MID” (Middle) or

“TREBLE” (Treble).

5 Press [2, 1] to adjust the level and then press [OK].

≥ Each level can be adjusted between “s10” and “r10”.



≥ For information on the operations of the SE-R1, please also refer

to its operating instructions.

Troubleshooting

Before requesting service, make the following checks. If you

are uncertain about some of the check points, or if the

solutions indicated in the following guide does not resolve

the issue, then consult your dealer for instructions.

Heat buildup of this unit.

≥This unit becomes warm when used for a long time. This is

not a malfunction.

Do you have the latest firmware installed?

≥Panasonic is constantly improving the unit’s firmware to

ensure that our customers are enjoying the latest

technology. (> 22)

A “humming” sound can be heard during

playback.

≥An AC mains lead or fluorescent light is near the cables.

Keep other appliances and cords away from the cables of

this unit.

No sound.

≥Check the volume of the connected device (amplifier, etc.).

≥Check to see if the cable connections to the input and

output terminals are incorrect. If this is the case, turn off

this unit and reconnect the cables correctly.

≥Check to see if the correct input source is selected.

≥Insert the plugs of the cables to be connected all the way

in.

≥When “Digital Output”, “Analog Output” and “Digital Link”

are set to “Off”, no sound will be output. Change the setting

of the output terminal to be used to “On”. (> 20)

≥Playback of multi-channel content is not supported.

≥The digital audio input terminals of this unit can only detect

linear PCM (LPCM) signals. For details, refer to the

operating instructions of the

connected

device.

Using the system control

function

To return all settings to the factory defaults

When the following situations occur, reset the memory:

≥ There is no response when buttons are pressed.

≥ You want to clear and reset the memory contents.

1 Press [SETUP].

2 Press [3, 4] repeatedly to select “Initialization” and

then press [OK].

3 Press [3, 4] to select “Yes” and then press [OK].

4 Press [3, 4] to select “Yes” and then press [OK]

again.

General

(23)

SU-R1-SQT0463_EBEG_mst.book 23 ページ２０１５年６月１８日　木曜日　午前１１時５４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Technics SUR1EB Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Technics SUR1EB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info