536099
101
Zoom out
Zoom in
Vorherige Seite
1/200
Nächste Seite
Part IV Sequencer
101
QQTG0692
Sequencer
Changing the note position etc. of the
recorded data
You can change the note pitch and position etc. of recorded data.
Select the function
1.
On the SEQ MENU display, use the SONG
and
buttons to select the number of the
song. Then select RANGE EDIT.
The display looks similar to the following.
2.
On the RANGE EDIT display, select a func-
tion.
3.
Perform the editing procedures. (See below.)
During the editing procedure, if the indicator
for the TEMPO/PROGRAM is lit, you can use
the TEMPO/PROGRAM for the editing func-
tion.
NOTE CHANGE
Change of pitch of specified notes.
1.
Use the TRACK
and
buttons to select the
track you wish to edit.
You cannot select the track for the CONTROL,
RHYTHM or CHORD part.
If ALL is selected, all tracks will be edited.
2.
Use the FIRST MEAS
and
buttons to
specify the start point (measure number) of
the note change.
3.
Use the LAST MEAS
and
buttons to spec-
ify the end point (measure number) of the note
change.
4.
Use the TARGET NOTE
and
buttons to
specify the pitch of the note you wish to
change.
The number next to the note name is its note
number.
5.
Use the CHANGE TO
and
buttons to
specify the pitch you wish to change to.
6.
Press the OK button.
The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
09_Part IV.fm 101 ペー ジ 2003年2月 5日 水曜日  午後1時34分
101

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Technics SX-KN2400 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info