Bedienungsanleitung Technics SX-KN2400 (Seite 121 von 200) (Englisch)

536099

121

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

Part VI Disk Drive (KN2400)

121

QQTG0692

Disk Drive (KN2400)

Ⅲ

ⅢⅢ

Ⅲ

SINGLE LOAD

You can specify which data to load from a disk

into a specific PANEL MEMORY, COMPOSER

(MEMORY), SOUND MEMORY, EFFECT

MEMORY or SEQUENCER (when SONG SAVE

was executed) memory.

Use the PAGE buttons to access the PAGE

3/3 SINGLE LOAD display.

• The display looks similar to the following.

Use the MODE button to select the data you

wish to load.

Use the BANK/SINGLE button to select the

load increment. (except for SEQUENCER)

BANK:

Load one bank at a time.

SINGLE:

Load the smallest data increment.

Follow the appropriate procedure to load the

specified data.

• Specify the data source for SONG (left side),

and the data destination (this instrument’s

memory location) for TO.

Ⅲ

ⅢⅢ

Ⅲ

SMF LOAD

Load data which was saved in the “Standard

MIDI File” (SMF) format.

On the LOAD (PAGE 1/3) display, press the

SMF button.

• The display looks similar to the following.

• For disks which contain SMF files only, this

display appears automatically when LOAD is

selected on the DISK MENU display.

Use the buttons below the display to select the

filename you wish to load.

• If the number of files is 10 or more, you can

use the PREV and NEXT buttons to go back

or advance 10 files at a time.

• If you press the TECH button, the display

changes to the LOAD display for Technics for-

mat.

• You can use the INFORMATION button to

switch the displayed data.

DISK: Disk name

SONG: Song name

Use the TO SONG button to select the num-

ber to load to (this instrument’s SEQUENCER

song number).

• Songs to load are specified one at a time.

• The song name to load to is shown below the

TO SONG button.

Use the LOAD AS button to specify the load

method.

Select from the following.

GM/GM2 → GM2:

Activate the GM2 initialized settings, and

load GM/GM2 data.

NX → NX:

Active the NX SOUND settings, and load

NX data.

GM/GM2 → NX:

Activate the NX SOUND initialized settings,

and load GM/GM2 data.

PREV. TEC → NX:

Activate the NX SOUND initialized settings,

and load SMF data that was saved in the

TECHNICS mode on a previous model.

(The volume balance and octave settings

may differ from the saved settings.)

• If you select the setting which is different from

that in which the song was stored, the sounds,

octaves, and arrangement of percussion

instrument sounds, etc. will be different.

Press the LOAD button.

• The LOAD operation begins.

• When the operation has been successfully

completed, “COMPLETED!” is shown on the

display.

• If you press the START/STOP button, play-

back of the loaded data begins.

• During the LOAD operation, data that cannot

be processed by this instrument is ignored.

11_Part VI.fm 121 ページ２００３年２月５日　水曜日　午後２時４３分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Technics SX-KN2400 Seite 121

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info