Bedienungsanleitung Technics SX-KN2600 (Seite 89 von 200) (Englisch)

536100

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

Part IV Sequencer

QQTG0692

Sequencer

(1) While playing an Am chord, press the

key

one time.

(2) While playing an F chord, press the

key one

time.

(1) While playing a D7 chord, press the

key one

time.

(2) While playing a G7 chord, press the

key one

time.

• You can press the INTRO & ENDING button

or a FILL IN button on the panel to store the

desired pattern at the cursor position. (An

INTRO or COUNT INTRO can be stored only

at the beginning.)

• Store a rest by pressing a note value key with-

out specifying a chord.

At the end of the chord progression, press the

End key ( ).

• The Keyboard exits the recording mode.

• During playback, playback of the recorded

chord progression stops at this point. For

automatic repeat playback of the chord pro-

gression, press the Repeat key ( ) instead

of the End key ( ).

• When you play back the track for the CHORD

part, the chords of the automatic accompani-

ment change in accordance with the stored

chord progression.

• To specify chords by the <one finger> mode,

select the BASIC mode before entering the

STEP RECORD mode.

• If the ON BASS button is on, chords such as

“C on G” can also be specified (except in the

<one finger> mode).

• The CHORD FINDER feature, which shows

you how to finger a specified chord, is avail-

able. (Refer to page 55.)

Ⅲ

ⅢⅢ

Ⅲ

Correct the recorded chord progression

Follow the procedure to select the STEP

RECORD: CHORD display.

Use the MEAS buttons to go to the measure

you wish to modify. Use the

ᮤ

and

ᮣ

Correc-

tion keys to move the cursor to the point (

∗

)

you wish to edit.

• The lengths of rests are indicated by the

respective rest value × its multiplier.

Example:

.................1-beat rest (quarter rest)

‰

................1/2-beat rest (eighth rest)

× 1 +

‰

....1-1/2-beat rest

(dotted quarter rest)

× 10........10-beat rest

• To go to the end of the chord progression,

while pressing the Reset key ( ), press the

ᮤ

key.

Correct the chord data.

Chord data

When the chord name is displayed at the cursor

position, you can press the DELETE key to

erase the data and then store a new chord.

• If you do not erase the displayed data before

entering new chord data, the new data is

inserted at this point, and the displayed data is

merely shifted by the note value of the new

chord.

• Rests can also be erased. Each time the

DELETE key is pressed, the rest is erased in

units of

× 1. The

‰

rest is erased last.

• If you wish to cancel the REPEAT, enter an

END command.

Control data

The name of the stored function (INTRO, FILL,

etc.) is displayed. You can press the DELETE

key to erase the data which is displayed.

Ⅲ

ⅢⅢ

Ⅲ

TRACK CLEAR

To erase all data from the current track, press

the CLR button, and then press the YES button

on the confirmation display.

• If you wish to cancel the clear procedure,

press the NO button.

09_Part IV.fm 89 ページ２００３年２月５日　水曜日　午後１時３４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Technics SX-KN2600 Seite 89

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info