Bedienungsanleitung Technika BRSS10 (Seite 15 von 36) (Englisch)

490791

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

PLAYING A BLU-RAY OR DVD-VIDEO DISC

Audio selection:

Some discs will include multiple soundtracks in dierent

languages or using dierent encoding methods.

To change the audio soundtrack -

Press the • AUDIO button.

The Audio yout menu will open.

Press the • M or N button to scroll through the options

available.

Press the • ENTER button to choose an option.

Play will now resume with your choice of audio soundtrack.

After a short delay, the yout will close.

Zoom and pan (DVD Video discs only):

Press the • ZOOM button repeatedly to select the zoom

level you want from the options of Zoom o, Zoom x

2, Zoom x 4.

The view will zoom to the centre of the picture.

Press the • O,P,M,N buttons to pan the zoomed area

around the photo.

The zoom icon will show where the zoomed area is on the

photo.

Press the • ZOOM button repeatedly to return to normal

view.

Zoom O is indicated on the TV screen.

Volume and mute:

The volume setting for the sound of your system should

normally be set on the TV or AV surround decoder (if

you have one in your AV system). If required, you can

independantly adjust the player volume from the remote

control.

Press the • VOL+ button to increase the volume

setting.

Press the • VOL- button to decrease the volume

setting.

The volume level will be shown on-screen as a number in the

range 0-100 and also as a bargraph display.

To mute the sound completely, press the • MUTE

button.

To un-mute the sound, press the • MUTE button again.

The mute status will be displayed briey.

Resolution (HDMI only):

CAUTION: If you change to display resolution

settings that are incompatible with your TV, you

may lose the TV picture completely. If your TV is

connected via HDMI, the ‘Auto’ setting (factory

setting) is strongly recommended as the TV will

automatically set the resolution of the player for

optimum results.

NOTE: Although resolution settings will display on a TV

connected to the composite video (CVBS) video output,

the resolution of this video output is xed at 576i (PAL

operation) or 480i (NTSC operation).

To change the resolution -

Press the • RESOLUTION button once to display the

resolution setting currently in use.

Press the • RESOLUTION button repeatedly to switch

between the available resolutions.

Wait after each press for the picture to stabilise (this •

may take around 7 seconds) before pressing again to

step to the next resolution setting.

The resolution settings available are -

Auto•

1080p•

1080i•

720p•

576p•

576i•

NOTE: Changing the resolution setting from HDMI Auto

may result in the loss of a stable picture. If this happens

refer to the Troubleshooting section for instructions to

recover the picture.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Technika BRSS10 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info