4.5 Mains power connection
The digital receiver should only be connected to the mains power supply after it has been
completely connected with all other components in the system. This serves to avoid the digi-
tal receiver or other components being damaged or destroyed.
f When you have completed making all the connections, use the mains cable (DigiPal
2) or power adapter (DigitMod T1) supplied to connect the receiver to a mains power
outlet 230 V/50-60 Hz.
4.6 Serial interface (RS 232)*
The RS 232 interface is used to update the operating system, and to facilitate pre-program-
ming by means of a personal computer.
5 Getting started: initial installation
When you have read the safety notes, and have connected the unit as described in Chapter 4,
you can proceed to switch on the receiver as described in Chapter 7. When switching on the
unit for the first time, the Start window with the AutoInstall installation assistantwill be
displayed. The installation assistant will guide you through the most important settings of the
digital receiver quickly and in an easy-to-follow manner.
The keys on the remote control required to make the appropriate step in the installation are
marked.You can break off the initial installation procedure at any time by pressing the redfunc-
tion key.
Pressing the green function key takes you back to the previous step of the installation pro-
cedure. This allows you to correct any entries made in error.
If the initial installation is not carried out at all, or is interrupted, your unit will start operation
with its standard pre-programmed settings.
The initial installation procedure described her serves only as an example. The exact initial
installation procedure will depend on the settings you wish to make.
Please follow closely any instructions that appear on the screen.
Menu/OSD language:
> Press OK to display the selection window for the Menu/OSD language.
> Use the arrow keys up/down to select the preferred OSD language.
> Confirm by pressing OK.
Audio language
> Use the arrow keys up/down to select the preferred audio channel language.
When the installation assistant has been completed, your language selection here will
be used to sort the programmes in your Favourites list.
> Confirm by pressing OK.
Country/Time Zone
> Use the arrow keys up/down to select the time zone of the country in which you
are located.
(Fig. 5-4)
The time on the receiver clock will be set automatically based on your selection.
> Press OK to confirm your selection, and continue with antenna configuration.
12
